Panasonic WV-CW970 / WV-CW974 Service Manual ▷ View online
CONTENTS
CONSTRUCTION
.....................................................................................................................................................1-1
LIST OF CONSUMPTION PARTS
...........................................................................................................................1-1
ADJUSTMENT PROCEDURE
.................................................................................................................................2-1
WIRING DIAGRAM
WV-CW970 ...........................................................................................................................................................3-1
WV-CW974 ...........................................................................................................................................................3-2
SCHEMATIC DIAGRAM
MAIN BOARD (1/3) / SENSOR BOARD...............................................................................................................4-1
MAIN BOARD (2/3)...............................................................................................................................................4-2
MAIN BOARD (3/3) / TILT BOARD ......................................................................................................................4-3
AUTO TRACKING BOARD ..................................................................................................................................4-4
SERVO BOARD (1/2) ...........................................................................................................................................4-5
SERVO BOARD (2/2) ...........................................................................................................................................4-6
COMMUNICATION BOARD .................................................................................................................................4-7
SWITCH BOARD ..................................................................................................................................................4-8
POWER BOARD FOR WV-CW970 ......................................................................................................................4-9
POWER BOARD FOR WV-CW974 ....................................................................................................................4-10
CONDUCTOR VIEW
MAIN BOARD .......................................................................................................................................................5-1
AUTO TRACKING BOARD (COMPONENT SIDE) ..............................................................................................5-2
AUTO TRACKING BOARD (PATTERN SIDE) .....................................................................................................5-3
SERVO BOARD / SENSOR BOARD / TILT BOARD (COMPONENT SIDE) .......................................................5-4
SERVO BOARD / SENSOR BOARD (PATTERN SIDE) ......................................................................................5-5
COMMUNICATION BOARD (COMPONENT SIDE).............................................................................................5-6
COMMUNICATION BOARD (PATTERN SIDE) ...................................................................................................5-7
SWITCH BOARD ..................................................................................................................................................5-8
POWER BOARD FOR WV-CW970 ......................................................................................................................5-9
POWER BOARD FOR WV-CW974 ....................................................................................................................5-10
EXPLODED VIEW
(1/10) (MAIN UNIT-1) ...........................................................................................................................................6-1
(2/10) (MAIN UNIT-2) ...........................................................................................................................................6-2
(3/10) (MAIN UNIT-3) ...........................................................................................................................................6-3
(4/10) (MECHANICAL UNIT-1) .............................................................................................................................6-4
(5/10) (MECHANICAL UNIT-2) .............................................................................................................................6-5
(6/10) (CAMERA UNIT) ........................................................................................................................................6-6
(7/10) (DOME HOUSING UNIT-1) ........................................................................................................................6-7
(8/10) (DOME HOUSING UNIT-2) ........................................................................................................................6-8
(9/10) (UPPER BASE UNIT).................................................................................................................................6-9
(10/10) (PACKAGING)........................................................................................................................................6-10
REPLACEMENT PARTS LIST
................................................................................................................................7-1
1-1
CONSTRUCTION
Attachment Pipe
Upper Base
Alarm Input Connector
Alarm Output Connector
Video Output Connector
Data Port
Rear sun shield (provided)
Front sun shield (provided)
Sun shield (pre-attached at factory)
Dome cover (do not remove)
Lens
Camera Safety Wire
Power Connector
for WV-CW970
for WV-CW970
Power Connector
for WV-CW974
for WV-CW974
WARN
ING
INPOR
TANT
LIST OF CONSUMPTION PARTS
REF. NO.
PART NAME
LIFE
MO1
Pan Motor
2.16 million actions
MO2
Tilt Motor
(19 200 hours )
M50
Lens (Focus Motor, Zoom Motor)
Each 3.7 million actions
* Lens Motor itself is not supplied, but only
supplied as assembly.
M41
Slip Ring
2.4 million actions
• Those figures are just for a reference under 35 °C environmental temperature and not for a guarantee.
It changes depending on the actual environment/operating condition.
• Part numbers of these consumption parts are described in Replacement Parts List on page 7-1.
2-1
1. Test Equipment Required
The following Test Equipments are required for Adjustment
of the Colour CCTV Camera WV-CW970/WV-CW974.
8 Oscilloscope
8 Frequency Counter
8 Vectorscope
8 Underscanned Colour Video Monitor
8 24 V AC/12 V DC Power Supply Unit
8 Personal Computer (IBM PC/AT type or equivalent)
8 Standard Straight RS-232C Cable
8 Lux Meter
8 Lighting (140 footcandles (1 400 lx), Colour Temperature
of the Colour CCTV Camera WV-CW970/WV-CW974.
8 Oscilloscope
8 Frequency Counter
8 Vectorscope
8 Underscanned Colour Video Monitor
8 24 V AC/12 V DC Power Supply Unit
8 Personal Computer (IBM PC/AT type or equivalent)
8 Standard Straight RS-232C Cable
8 Lux Meter
8 Lighting (140 footcandles (1 400 lx), Colour Temperature
3 200°K)
8 Colour Temperature Conversion Filters
Recommended manufacturer and part numbers are
shown in Table 1-1.
shown in Table 1-1.
Table 1-1
8 Radiation Chart
8 Logarithmic Gray Scale Chart
8 Logarithmic Gray Scale Chart
(Part Number: YWV2310RB99)
8 Colour Chip Chart (Part Number: YWV2100RB98)
8 White Chart or White Paper
8 System Controller such as WV-CU360C or WV-CU650.
8 Remote Electric Variable Resistor (E.V.R.) Adjustment Kit
8 White Chart or White Paper
8 System Controller such as WV-CU360C or WV-CU650.
8 Remote Electric Variable Resistor (E.V.R.) Adjustment Kit
as shown in Fig. 1-1. (Part Number: YWV0EA1174AN)
8 Extension Board Ass'y for WV-CS850 Series
(Part Number : V0EA1265AN)
Extension Cable D for CN2, CN3 on the Communication
Board and CN2, CN3 on the Switch Board the as shown
in Fig. 1-2.
Extension Cable D for CN2, CN3 on the Communication
Board and CN2, CN3 on the Switch Board the as shown
in Fig. 1-2.
ADJUSTMENT PROCEDURE
Conversion
KENKO
KODAK
3 200°K → 5 100°K C12
80B
3 200°K → 6 500°K C4 and C12 80B and 80C
8 Extension Cable for E5 on the Power Board and CN5 on
the Communication Board as shown in Fig. 1-3.
(Part Number : K1PA02C00004)
(Part Number : K1PA02C00004)
8 Extension Cable Ass'y for WV-CS950 Series
(Part Number : V0EA1547AN)
Extension Cable A for CN201 on the Main Board and the
Lens Ass'y as shown in Fig. 1-4.
Extension Cable A for CN201 on the Main Board and the
Lens Ass'y as shown in Fig. 1-4.
Extension Cable B for CN300 on the Main Board and
CN500 on the Sensor Board as shown in Fig. 1-5.
CN500 on the Sensor Board as shown in Fig. 1-5.
8 CCD Mounting Adjustment Jig as shown in Fig. 1-6.
(Part Number : V0MA1231AN)
Fig. 1-4
Fig. 1-5
Fig. 1-2
UP
A
B
C
UP
A
B
C
D
Fig. 1-6
To
Main
Board
CN201
Main
Board
CN201
To
Lens
Ass'y
Lens
Ass'y
To
Main
Board
CN300
Main
Board
CN300
To
Sensor
Board
CN500
Sensor
Board
CN500
Fig. 1-1
Fig. 1-3
To
Power
Board
E5
Power
Board
E5
To
Communication
Board
CN5
Communication
Board
CN5
CN2
CN3
2-2
2. Disassembling Procedure for
Adjustment
8 Referring to Fig. 2-1, remove three Special screws that
secure the Upper Base Unit.
Note : Special screws are remove by using the Hexagon
Note : Special screws are remove by using the Hexagon
wrench for the hexagon button screw.
8 Release three Attachment screws of the Main Unit by
turning the Upper Base Unit to direction of the arrow and
remove the Upper Base Unit from the Main Unit.
remove the Upper Base Unit from the Main Unit.
8 Remove one screw that secure the Camera Safety Wire
and remove the Camera Safety Wire with the Sealing
Packing.
Packing.
8 Referring to Fig. 2-2, remove three screws that secure
the Sun Shield, release three Projections of the Sun
Shield by turning the Sun Shield to direction of the arrow
and remove the sun Shield from the Main Unit.
Shield by turning the Sun Shield to direction of the arrow
and remove the sun Shield from the Main Unit.
Fig. 2-1
Remove three screws.
Attachment
Screws
Screws
Upper Base
Unit
Unit
Main Unit
Sealing Packing
Remove one screw.
Camera
Safety Wire
Safety Wire
Fig. 2-2
Remove
three
screws.
three
screws.
Sun Shield
Projections
Main Unit
Click on the first or last page to see other WV-CW970 / WV-CW974 service manuals if exist.