Panasonic VL-G201RU-N / VL-G201RU-S Service Manual ▷ View online
5.3.2. To attach the power cable
•
•
•
•
While pressing on the button with a pointed object such as a screwdriver, insert the power cable into the terminal.
•
•
•
•
To disconnect the power cable, press on the button while pulling out.
•
•
•
•
To attach an optional power cable, cut off about 12 mm of the cable cover
, then push in firmly until the end of the cable is
securely inserted into the power connection terminal
.
5.3.3. To attach the wires
•
•
•
•
Strip off of the wire cover so that about 9 mm of the wire is exposed.
•
•
•
•
While pressing on the button with a pointed object such as a screwdriver, insert the wire into the terminal.
•
•
•
•
To disconnect a wire, press on the button while pulling out.
17
VL-G201RU-N / VL-G201RU-S
6 USING WITH ANOTHER MACHINE
See Wiring schematic diagram (P.10) for wiring information.
6.1. When connected to a PBX
Connecting to a PBX allows you to answer door calls using additional machines.
Please use only a Panasonic PBX.
•
•
•
•
If you answer a call from the door station with a PBX extension, the camera image from the door station will be displayed
at the monitor station. If the monitor station user tries to answer the call, a beep will sound. The display will turn off when
the conversation has ended or when the conversation continued for more than about 3 minutes.
at the monitor station. If the monitor station user tries to answer the call, a beep will sound. The display will turn off when
the conversation has ended or when the conversation continued for more than about 3 minutes.
•
•
•
•
If you answer a call from the door station with the monitor station, the call will continue to ring at the extension for about 15
to 30 seconds. If the extension user answers the call while the call is still ringing, the door station user, the monitor station
user, and the extension user can speak together.
to 30 seconds. If the extension user answers the call while the call is still ringing, the door station user, the monitor station
user, and the extension user can speak together.
•
•
•
•
[AUTO] mode will not function when a door station call is answered by an extension user.
6.2. When connected to a Door opener
Connecting to a door opener allows you to open the door using the monitor station.
18
VL-G201RU-N / VL-G201RU-S
7 ANSWERING A DOOR CALL
There are 3 ways to answer a door call. Choose the desired mode by changing the [ANSWER] switch position.
Important:
•
•
•
•
When speaking with a caller, speak in turns. If you and the caller speak at the same time, you will not hear each other.
7.1. Available answer modes
•
•
•
•
[AUTO] mode: When a visitor calls you, you can answer the call by voice.
•
•
•
•
[PUSH] mode (default): When a visitor calls you, you can answer the call by pressing [TALK]. You may then speak with the
caller.
caller.
•
•
•
•
[HOLD] mode: When a visitor calls you, you can answer the call by pressing [TALK]. Press [TALK] while speaking to the caller
and release the button to allow the caller to speak to you.
and release the button to allow the caller to speak to you.
Note:
•
•
•
•
If the door station is located in a noisy place or near a big road, [PUSH] mode or [AUTO] mode may not function properly.
7.2. [PUSH] mode (Push to talk mode)
1. When a ringer tone is heard, press [TALK]
2. Speak to the visitor.
3. To end the conversation, press [TALK].
•
•
•
•
The display will turn off.
7.3. [AUTO] mode (Auto talk mode)
This mode allows you to answer the call by voice. Speak a brief reply into (or toward) the monitor station, such as “Yes?” or
“Hello?”. This reply is used to start [AUTO] mode; the visitor will not hear your reply. The monitor station will beep to indicate
[AUTO] mode has started and you may then speak to the visitor.
“Hello?”. This reply is used to start [AUTO] mode; the visitor will not hear your reply. The monitor station will beep to indicate
[AUTO] mode has started and you may then speak to the visitor.
1. When a ringer tone is heard, answer “Yes?” within 30 seconds.
•
•
•
•
A beep will sound to indicate that you can talk to the visitor (hands-free conversation).
2. Speak to the visitor.
3. To end the conversation, press [TALK].
Note:
•
•
•
•
Make sure you are within about 50 cm of the monitor station.
•
•
•
•
You can also answer the call by pressing [TALK].
•
•
•
•
Your initial reply should be brief (less than 1 second), otherwise [AUTO] mode will not start.
•
•
•
•
If a visitor calls you, a loud, brief sound (such as a barking dog) may start [AUTO] mode even though you have not replied
by voice.
by voice.
19
VL-G201RU-N / VL-G201RU-S
7.4. [HOLD] mode (Hold to talk mode)
1. When a ringer tone is heard, press and hold [TALK] to speak to the caller.
•
•
•
•
A beep will sound and the Talking indicator will light.
2. To listen to the visitor, release [TALK].
•
•
•
•
The Talking indicator will turn off.
3. To speak again, press and hold [TALK].
4. To end the conversation, tap [TALK].
Note:
•
•
•
•
Make sure you speak to the caller only while pressing [TALK] and release [TALK] when you have stopped speaking so that
the caller can speak to you.
the caller can speak to you.
20
VL-G201RU-N / VL-G201RU-S
Click on the first or last page to see other VL-G201RU-N / VL-G201RU-S service manuals if exist.