Panasonic BL-C10CE / BL-C10E Service Manual ▷ View online
10.7. PYROELECTRIC INFRARED SENSOR CHECK
45
BL-C10CE / BL-C10E
10.8. THE INSPECTION AFTER THE REPAIR
Inspect the following items after the repair.
· Confirm the status (specially MAC Address) refer to CONFIRMING THE STATUS.
· PAN/TILT operation
· Pyroelectric Infrared Sensor
· Video quality
· Confirm the status (specially MAC Address) refer to CONFIRMING THE STATUS.
· PAN/TILT operation
· Pyroelectric Infrared Sensor
· Video quality
10.9. CONFIRMING THE STATUS
When turning on the power, CPU makes a check using the self-diagnosis function. Check being able to the access to the
devicedescribed below.
When the self-diagnosis function of the device described below is NG turning on the power, CPU makes a check using the
LEDindicator red-blinks.
devicedescribed below.
When the self-diagnosis function of the device described below is NG turning on the power, CPU makes a check using the
LEDindicator red-blinks.
46
BL-C10CE / BL-C10E
10.10. UPDATE FIRMWARE
10.10.1. Firmware Trouble Shouting
The firmware updating is not completed due to power off, network failure or other causes.
47
BL-C10CE / BL-C10E
11 THE WAY OF THE INITIALIZE
11.1. FACTORY DEFAULT RESET BUTTON
The camera has a Factory Default Reset button on the bottom.
Pressing the Factory Default Reset button resets the camera to factory default. If you lose your user name and password, use
this button to reset the camera.
· Press the Factory Default Reset button for 1 second when the camera is on.
· The indicator blinks orange, and turn off for 10 seconds.
· Do not turn off the camera until the indicator lights green.
Note:
this button to reset the camera.
· Press the Factory Default Reset button for 1 second when the camera is on.
· The indicator blinks orange, and turn off for 10 seconds.
· Do not turn off the camera until the indicator lights green.
Note:
· The internal clock will not be reset, but the time format will return to AM/PM mode. Set it again.
· See Operating Instructions for default settings.
· All buffered images are deleted when resetting the camera to factory default.
· The reset operation takes about 1 minute.
· See Operating Instructions for default settings.
· All buffered images are deleted when resetting the camera to factory default.
· The reset operation takes about 1 minute.
11.2. RESETTING THE CAMERA TO FACTORY DEFAULT
This feature will be executed and all camera settings reset to factory default directly after the Execute button is clicked.
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
· The indicator blinks orange, and turn off for 10 seconds.
· All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.
· If the camera is reset to factory default, the network connection modechanges to [Automatic Setup]. Reconfigure the camera
· All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.
· If the camera is reset to factory default, the network connection modechanges to [Automatic Setup]. Reconfigure the camera
seeing the Getting Started.
Note:
· Internal clock will not be reset, but the time format will return to AM/PM mode. Set it again.
· Please refer to Operating Instructions for default values.
· Pressing FACTORY DEFAULT RESET button resets the camera to the factory default.
· All buffered images are deleted when resetting the camera to factory default.
· The reset operation takes about 1 minute.
· Do not turn off the camera during the reset operation.
· Please refer to Operating Instructions for default values.
· Pressing FACTORY DEFAULT RESET button resets the camera to the factory default.
· All buffered images are deleted when resetting the camera to factory default.
· The reset operation takes about 1 minute.
· Do not turn off the camera during the reset operation.
48
BL-C10CE / BL-C10E
Click on the first or last page to see other BL-C10CE / BL-C10E service manuals if exist.