Panasonic CQ-xxx Service Manual / Other ▷ View online
Reassembling and Reinstalling the Optical pickup unit
IN DASH CHANGER UNIT - Module 5
Part Three
Reassembly and reinstallation of the optical deck
basically consists of performing each of the
previous steps in reverse order with the exception
of some pre-positioning requirements.
(Refer to pages 48 ~ 56 of the Technical Guide for
more information on reinstalling the Optical Deck.)
more information on reinstalling the Optical Deck.)
IDC Module 5 : Removal and Reinstallation of the Optical Deck Assembly
Part Three,1
Replace the screw to the
traverse motor bracket
then
replace the screw to the
gear bracket
.
Reassembling the Optical pickup unit
IDC Module 5 : Removal and Reinstallation of the Optical Deck Assembly
Part Three,2
Reassembling the Optical pickup unit
The
optical pickup a’ssy
should be adjusted completely
inward
on the
feed screw
before installing the bottom
suspension plate.
IDC Module 5 : Removal and Reinstallation of the Optical Deck Assembly
Reassembling the Optical pickup unit
When reinstalling the bottom suspension plate onto the
suspension chassis, ensure that the indicated
tab
of the
optical pickup is positioned between the two “
fingers
” on
the bottom suspension plate.
Part Three,3
Click on the first or last page to see other CQ-xxx service manuals if exist.