Panasonic SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN Service Manual ▷ View online
29
8.8.
Disassembly of Top Cabinet
• Refer to “Disassembly of Bottom Chassis Block”
Step 1 : Remove 25 screws.
Caution : During assembling, fixed the screws in sequence
of 1 to 25 as shown.
Caution : During assembling, fixed the screws in sequence
of 1 to 25 as shown.
Step 2 : Detach the Top Cabinet in sequence (1-6) as shown.
Step 3 : Remove the Top Cabinet.
Caution : During assembling, ensure that the Top Cabinet
is fully seated.
Caution : During assembling, ensure that the Top Cabinet
is fully seated.
30
8.9.
Disassembly of Panel P.C.B.
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Remove the Panel P.C.B. Block.
Caution : During assembling, ensure that the Panel P.C.B.
Block is inserted properly into the guides.
Caution : During assembling, ensure that the Panel P.C.B.
Block is inserted properly into the guides.
Caution : During assembling, ensure that the 16P FFC is
slot into the hole.
slot into the hole.
Step 2 : Remove 2 screws.
Step 3 : Remove the Panel P.C.B..
Caution : During assembling, ensure that the Panel P.C.B.
Block is seated properly onto the 2 locators of the Front
Chassis.
Block is seated properly onto the 2 locators of the Front
Chassis.
31
8.10. Disassembly of Bluetooth Mod-
ule
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Remove the Panel P.C.B. Block.
Caution : During assembling, ensure that the Panel P.C.B.
Block is inserted properly into the guides.
Caution : During assembling, ensure that the Panel P.C.B.
Block is inserted properly into the guides.
Step 2 : Remove 1 screw.
Step 3 : Remove the Bluetooth Module.
Step 3 : Remove the Bluetooth Module.
Caution : During assembling, ensure that the 5P wire is
inserted into the hole.
inserted into the hole.
32
8.11. Disassembly of NFC P.C.B.
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Remove 2 screws.
Step 2 : Release the Push Button from the Bottom Cabinet
Block.
Step 2 : Release the Push Button from the Bottom Cabinet
Block.
Step 3 : Lift up to remove the NFC P.C.B. Block.
Caution : During assembling, ensure that the Push Button
and NFC P.C.B. are fitted properly to Bottom Cabinet
Block.
Caution : During assembling, ensure that the Push Button
and NFC P.C.B. are fitted properly to Bottom Cabinet
Block.
Step 4 : Detach 7P wire at connector (P4000) on the NFC
P.C.B..
P.C.B..
Step 5 : Remove 2 screws.
Step 6 : Remove the NFC P.C.B..
Click on the first or last page to see other SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN service manuals if exist.