Panasonic SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN Service Manual ▷ View online
37
8.14. Assembly of Wire Dressing for Subwoofer Unit
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Inserted 4P connector (CN5100) into the Hole.
Step 2 : Insert the 4P wire into the slots & guides.
Step 2 : Insert the 4P wire into the slots & guides.
38
8.15. Assembly of Wire Dressing for Front Speaker Unit
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Inserted 4P connector (CN5101) into the Hole.
Step 2 : Insert the 4P wire into the slot & guides.
Step 2 : Insert the 4P wire into the slot & guides.
39
8.16. Assembly of Wire Dressing for NFC P.C.B.
• Refer to “Disassembly of Bottom Chassis Block”
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Top Cabinet”
Step 1 : Inserted 7P connector (CN2003) into the Hole.
Step 2 : Insert the 7P wire into the slot & guides.
Step 2 : Insert the 7P wire into the slot & guides.
40
9 Service Position
Note: For description of the disassembly procedures, see the Section 8
9.1.
Checking of Main P.C.B. (Side
B) & HDMI P.C.B. (Side B)
B) & HDMI P.C.B. (Side B)
Step 1 : Remove the Bottom Chassis Block.
Step 2 : Place the Bottom Chassis Block on a Support Block.
Step 3 : Connect 16P FFC at connector (CN2008) on the Main
P.C.B..
Step 4 : Connect 5P wire at connector (CN2002) on the Main
P.C.B..
Step 5 : Connect 7P wire at connector (CN2003) on the Main
P.C.B..
Step 6 : Connect 4P wire at connector (CN5101) on the Main
P.C.B..
Step 7 : Connect 4P wire at connector (CN5100) on the Main
P.C.B..
Step 2 : Place the Bottom Chassis Block on a Support Block.
Step 3 : Connect 16P FFC at connector (CN2008) on the Main
P.C.B..
Step 4 : Connect 5P wire at connector (CN2002) on the Main
P.C.B..
Step 5 : Connect 7P wire at connector (CN2003) on the Main
P.C.B..
Step 6 : Connect 4P wire at connector (CN5101) on the Main
P.C.B..
Step 7 : Connect 4P wire at connector (CN5100) on the Main
P.C.B..
Step 8 : Check the Main P.C.B. (Side B) & HDMI P.C.B. (Side
B) according to the diagram shown.
B) according to the diagram shown.
Click on the first or last page to see other SC-HTE80EB / SC-HTE80EE / SC-HTE80EG / SC-HTE80GN service manuals if exist.