Panasonic SC-HC40EG / SC-HC40EP Service Manual ▷ View online
53
Step 4 : Remove 1 screw.
Step 5 : Remove the Voltage Regulator IC (IC2910).
Step 5 : Remove the Voltage Regulator IC (IC2910).
9.25.2.
Assembly of Voltage Regulator IC
(IC2910)
(IC2910)
Step 1 : Apply grease to the Heatsink Unit.
Step 2 : Fix & screw the Voltage Regulator IC (IC2910) onto
the Heatsink Unit.
Caution : Ensure the Voltage Regulator IC (IC2910) is
tightly screwed to the Heatsink Unit.
Step 2 : Fix & screw the Voltage Regulator IC (IC2910) onto
the Heatsink Unit.
Caution : Ensure the Voltage Regulator IC (IC2910) is
tightly screwed to the Heatsink Unit.
Step 3 : Mount the Voltage Regulator IC (IC2910) onto SMPS
P.C.B.
Caution : Ensure the Voltage Regulator IC (IC2910) is
seated properly on the SMPS P.C.B..
P.C.B.
Caution : Ensure the Voltage Regulator IC (IC2910) is
seated properly on the SMPS P.C.B..
Step 4 : Solder pins of the Heatsink Unit.
Step 5 : Solder pins of the Voltage Regulator IC (IC2910).
Caution : Ensure the Voltage Regulator IC (IC2910) is
seated properly onto the SMPS P.C.B. before soldering.
Step 5 : Solder pins of the Voltage Regulator IC (IC2910).
Caution : Ensure the Voltage Regulator IC (IC2910) is
seated properly onto the SMPS P.C.B. before soldering.
54
9.26. Replacement of Diode (D5802)
• Refer to "Disassembly of SMPS P.C.B.".
9.26.1.
Disassembly of Diode (D5802)
Caution : Handle the heatsink unit and P.C.B. with caution
due to its high temperature after prolonged use. Touching
it may lead to injuries.
due to its high temperature after prolonged use. Touching
it may lead to injuries.
Step 1 : Desolder pins of Diode (D5802) on the solder side of
SMPS P.C.B..
SMPS P.C.B..
Step 2 : Remove 1 screw.
Step 3 : Remove the Diode (D5802).
Step 3 : Remove the Diode (D5802).
9.26.2.
Assembly of Diode (D5802)
Step 1 : Apply grease to the Heatsink Unit.
Step 2 : Mount the Diode (D5802) onto SMPS P.C.B.
Caution : Ensure the Diode (D5802) is seated properly on
the SMPS P.C.B..
Step 3 : Fix & screw the Diode (D5802) onto the Heatsink Unit.
Step 2 : Mount the Diode (D5802) onto SMPS P.C.B.
Caution : Ensure the Diode (D5802) is seated properly on
the SMPS P.C.B..
Step 3 : Fix & screw the Diode (D5802) onto the Heatsink Unit.
Step 4 : Solder pins of the Diode (D5802).
Caution : Ensure the Diode (D5802) is seated properly onto
the SMPS P.C.B. before soldering.
Caution : Ensure the Diode (D5802) is seated properly onto
the SMPS P.C.B. before soldering.
55
9.27. Disassembly of Horizontal
Main P.C.B. and Vertical Main
P.C.B.
P.C.B.
• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to "Disassembly of Traverse Unit”
• Refer to "Disassembly of USB P.C.B.”
• Refer to "Disassembly of Headphone/AUX P.C.B.”.
• Refer to “Disassembly of PCB Block”.
• Refer to (Step 1) - (Step 2) of item 9.23.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to "Disassembly of Traverse Unit”
• Refer to "Disassembly of USB P.C.B.”
• Refer to "Disassembly of Headphone/AUX P.C.B.”.
• Refer to “Disassembly of PCB Block”.
• Refer to (Step 1) - (Step 2) of item 9.23.
Step 1 : Detach Horizontal Main P.C.B. and Vertical Main
P.C.B. as arrow shown.
P.C.B. as arrow shown.
9.28. Replacement of Power Ampli-
fier IC (IC1)
• Refer to "Disassembly of Horizontal Main P.C.B. and Vertical
Main P.C.B.".
9.28.1.
Disassembly of Power Amplifier IC
(IC1)
(IC1)
Caution : Handle the heatsink unit and P.C.B. with caution
due to its high temperature after prolonged use. Touching
it may lead to injuries.
due to its high temperature after prolonged use. Touching
it may lead to injuries.
Step 1 : Desolder pins of Heatsink Unit on the Vertical Main
P.C.B. (Side A).
P.C.B. (Side A).
Step 2 : Remove the Heatsink Unit.
56
Step 3 : Desolder pins of Power Amplifier IC (IC1) on the Verti-
cal Main P.C.B. (Side B).
Step 4 : Remove the Power Amplifier IC (IC1).
cal Main P.C.B. (Side B).
Step 4 : Remove the Power Amplifier IC (IC1).
9.28.2.
Assembly of Power Amplifier IC
(IC1)
(IC1)
Step 1 : Fix the Power Amplifier IC (IC1) onto Vertical Main
P.C.B.
Step 2 : Solder pins of the Power Amplifier IC (IC1).
Caution : Ensure the Power Amplifier IC (IC1) is seated
properly onto the Vertical Main P.C.B. before soldering.
P.C.B.
Step 2 : Solder pins of the Power Amplifier IC (IC1).
Caution : Ensure the Power Amplifier IC (IC1) is seated
properly onto the Vertical Main P.C.B. before soldering.
Step 3 : Apply grease onto the top side of the Power Amplifier
IC (IC1).
Step 4 : Fix the Heatsink Unit onto the Vertical Main P.C.B..
IC (IC1).
Step 4 : Fix the Heatsink Unit onto the Vertical Main P.C.B..
Step 5 : Solder pins of the Heatsink Unit.
Click on the first or last page to see other SC-HC40EG / SC-HC40EP service manuals if exist.