Panasonic SC-HC40EG / SC-HC40EP Service Manual ▷ View online
45
Step 8 : Desolder 4P on USB P.C.B..
Caution : During assembling, ensure the USB P.C.B. is
seated properly on the pins of the plate.
Caution : During assembling, ensure the USB P.C.B. is
seated properly on the pins of the plate.
Step 9 : Remove USB P.C.B..
9.20. Disassembly of USB Lid
• Refer to “Disassembly of USB P.C.B.”.
Step 1 : Remove the spring from the shaft.
Caution : Keep the spring in safe place and place them
back during assembling.
Caution : Keep the spring in safe place and place them
back during assembling.
Step 2 : Insert a flathead screwdriver in the opening under the
USB Lid and push the USB Lid as arrow shown.
USB Lid and push the USB Lid as arrow shown.
46
Step 3 : Repeat the same action on the other side of the USB
Lid.
Lid.
Step 4 : Remove the USB Lid.
9.21. Disassembly of Headphone/
AUX P.C.B.
• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to "Disassembly of Traverse Unit”
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to "Disassembly of Traverse Unit”
Step 1 : Remove 1 screw.
Step 2 : Remove Headphone/AUX P.C.B..
Caution : During assembling, ensure the Headphone/AUX
P.C.B. is seated properly.
Step 2 : Remove Headphone/AUX P.C.B..
Caution : During assembling, ensure the Headphone/AUX
P.C.B. is seated properly.
47
9.22. Disassembly of PCB Block
• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to "Disassembly of Traverse Unit”
• Refer to "Disassembly of USB P.C.B.”
• Refer to "Disassembly of Headphone/AUX P.C.B.”
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to "Disassembly of Traverse Unit”
• Refer to "Disassembly of USB P.C.B.”
• Refer to "Disassembly of Headphone/AUX P.C.B.”
Step 1 : Detach 7P FFC at the connector (CN902) on the Verti-
cal Main P.C.B..
Step 2 : Detach 12P FFC at the connector (CN302) on the Ver-
tical Main P.C.B..
Step 3 : Detach 9P FFC at the connector (CN350) on the Verti-
cal Main P.C.B..
cal Main P.C.B..
Step 2 : Detach 12P FFC at the connector (CN302) on the Ver-
tical Main P.C.B..
Step 3 : Detach 9P FFC at the connector (CN350) on the Verti-
cal Main P.C.B..
Step 4 : Detach 2P wires at the connector (CN3) on the Vertical
Main P.C.B..
Step 5 : Detach 2P wires at the connector (CN2) on the Vertical
Main P.C.B..
Step 6 : Detach 2P wires at the connector (CN103) on the Hor-
izontal Main P.C.B..
Main P.C.B..
Step 5 : Detach 2P wires at the connector (CN2) on the Vertical
Main P.C.B..
Step 6 : Detach 2P wires at the connector (CN103) on the Hor-
izontal Main P.C.B..
Step 7 : Remove 1 screw.
48
Step 8 : Remove 2 screws.
Step 9 : Remove 4 screws.
Step 9 : Remove 4 screws.
Step 10 : Release the catch on the Vertical Main P.C.B.
Step 11 : Remove PCB Block.
Step 11 : Remove PCB Block.
Caution : During assembling, ensure the PCB Block is
seated properly on the locator and catch.
seated properly on the locator and catch.
Click on the first or last page to see other SC-HC40EG / SC-HC40EP service manuals if exist.