DOWNLOAD Panasonic SC-HC40EG / SC-HC40EP Service Manual ↓ Size: 9.19 MB | Pages: 127 in PDF or view online for FREE

41

9.14. Disassembly of Passive Radia-

tor (SP3).

• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to (Step 1) - (Step 4) of item 9.12.

Step 1 : Remove 4 screws.
Step 2 : Remove Passive Raidator (SP3).

9.15. Disassembly of Passive Radia-

tor (SP4).

• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.
• Refer to (Step 1) - (Step 2) of item 9.13.

Step 1 : Remove 4 screws.
Step 2 : Remove Passive Raidator (SP4).

42

9.16. Disassembly of Traverse Unit.

• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.

Step 1 : Remove 2 screws.
Step 2 : Slightly lift up the Traverse Unit.

Step 3 : Detach 25P FFC at the connector (CN7002) on the
Vertical Main P.C.B..
Step 4 : Remove Traverse Unit.

9.17. Disassembly of Traverse Cover

& Traverse Assembly.

• Refer to “Disassembly of Traverse Unit”.

Step 1 : Release 3 catches.
Step 2 : Remove the Traverse Cover.

Step 3 : Detach 25P FFC at the connector (CN7002) on the CD
Servo P.C.B..
Step 4 : Release both catches and push down the fixed pin as
arrow shown. 

43

Step 5 : Lift up the Traverse Assembly to remove it. 

9.18. Disassembly of CD Servo

P.C.B.

• Refer to "Disassembly of Traverse Unit” 

Step 1 : Desolder the terminal.
Step 2 : Remove 3 screws.

Step 3 : Flip the CD Servo P.C.B..
Step 4 : Detach FPC.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FPC of the optical pickup.
[See “Handling Precautions for traverse unit”]

44

9.19. Disassembly of USB P.C.B.

• Refer to “Disassembly of Stand Unit”.
• Refer to “Disassembly of CD Door Assembly”.
• Refer to “Disassembly of Net Frame Assembly”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Top Ornament Unit”.

Step 1 : Remove 2 screws.

Step 2 : Open USB Cover.

Step 3 : Lift up the USB Assembly.
Step 4 : Detach 22P FFC at the connector (P901) on the USB
P.C.B..
Step 5 : Remove the USB Assembly

Step 6 : Remove 2 screws.
Step 7 : Remove the USB Module.