Panasonic SC-HC15EB / SC-HC15EG / SC-HC15EP Service Manual ▷ View online
25
8 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Net Frame Assembly
• Disassembly of Base Stand Assembly
• Replacement of CD Door Ornament
• Replacement of CD Door Base
• Disassembly of Front Cabinet Assembly
• Disassembly of LCD Window
• Disassembly of Gear Box Assembly
• Replacement of Rack Top & Slider Top
• Disassembly of Bridge P.C.B. & Door Switch P.C.B.
• Replacement of Door Shaft & Slider Bottom
• Replacement of Timing Gear Shaft
• Disassembly of Top Ornament Unit & Button P.C.B.
• Disassembly of IR P.C.B. & Panel P.C.B.
• Disassembly of CD Mechanism
• Disassembly of CD Servo P.C.B.
• Disassembly of Jack Lid
• Disassembly of Tuner P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Speaker Unit
• Disassembly of Main P.C.B.
• Disassembly of Base Stand Assembly
• Replacement of CD Door Ornament
• Replacement of CD Door Base
• Disassembly of Front Cabinet Assembly
• Disassembly of LCD Window
• Disassembly of Gear Box Assembly
• Replacement of Rack Top & Slider Top
• Disassembly of Bridge P.C.B. & Door Switch P.C.B.
• Replacement of Door Shaft & Slider Bottom
• Replacement of Timing Gear Shaft
• Disassembly of Top Ornament Unit & Button P.C.B.
• Disassembly of IR P.C.B. & Panel P.C.B.
• Disassembly of CD Mechanism
• Disassembly of CD Servo P.C.B.
• Disassembly of Jack Lid
• Disassembly of Tuner P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Speaker Unit
• Disassembly of Main P.C.B.
26
8.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
27
8.2.
Types of Screws
8.3.
Main Parts Location Diagram
28
8.4.
Disassembly of Net Frame
Assembly
Assembly
8.4.1.
Disassembly of Net Frame Assem-
bly (L)
bly (L)
Step 1 : Gently lift up Net Frame Assembly (L) in order of
sequences (1) to (4) to release 4 bosses as shown.
sequences (1) to (4) to release 4 bosses as shown.
Step 2 : Remove Net Frame Assembly (L) as arrow shown.
Caution : During assembly of Net Frame Assembly (L),
ensure it is fixed properly.
ensure it is fixed properly.
Click on the first or last page to see other SC-HC15EB / SC-HC15EG / SC-HC15EP service manuals if exist.