Panasonic SC-HC15EB / SC-HC15EG / SC-HC15EP Service Manual ▷ View online
37
8.9.
Disassembly of LCD Window
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of CD Door Ornament”
• Refer to “Disassembly of CD Door Base”
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of CD Door Ornament”
• Refer to “Disassembly of CD Door Base”
Step 1 : Remove 8 screws in order of sequences (1) to (8) as
shown.
shown.
Step 2 : Remove 8 screws in order of sequences (1) to (8) as
shown.
shown.
Step 3 : Remove 6 screws in order of sequences (1) to (8) as
shown.
shown.
Step 4 : Lift up the Front Cabinet Assembly as arrow shown.
38
Step 5 : Detach 8P FFC at the connector (CN303) on Main
P.C.B..
Step 6 : Remove Front Cabinet Assembly.
P.C.B..
Step 6 : Remove Front Cabinet Assembly.
Caution : During assembling, ensure 8P FFC dress on top
of CD Mecha Rib.
of CD Mecha Rib.
Step 7 : Release 10 catches in order of sequences (1) to (10).
Caution : Do not use strong force as it may damage the
LCD Window.
Caution : Do not use strong force as it may damage the
LCD Window.
Step 8 : Remove LCD Window.
39
8.10. Disassembly of Gear Box
Assembly
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Front Cabinet Assembly”
• Refer to “Disassembly of Base Stand Assembly”
• Refer to “Disassembly of Front Cabinet Assembly”
Step 1 : Remove 3 screws.
Step 2 : Lift up Gear Box Assembly as shown.
Caution: During assembling of Gear Box Assembly, ensure
that the Gear Box Assembly is properly seated on the loca-
tors.
Step 2 : Lift up Gear Box Assembly as shown.
Caution: During assembling of Gear Box Assembly, ensure
that the Gear Box Assembly is properly seated on the loca-
tors.
Step 3 : Detach 2P wire at the connector on Motor P.C.B..
Step 4 : Remove Gear Box Assembly.
Step 4 : Remove Gear Box Assembly.
8.10.1.
Disassembly of Motor P.C.B.
• Refer to “Disassembly of Gear Box Assembly”
Step 1 : Release 2P wire from slot.
Caution : During assembling, ensure the 2P wire is dress
into the slot.
Caution : During assembling, ensure the 2P wire is dress
into the slot.
Step 2 : Release 2 catches as show.
Step 3 : Remove Motor P.C.B..
Caution: During assembling, ensure the Motor P.C.B. is
seated properly by the 2 catches.
Step 3 : Remove Motor P.C.B..
Caution: During assembling, ensure the Motor P.C.B. is
seated properly by the 2 catches.
40
Step 4 : Desolder pin on the solder side of Motor P.C.B.. and
remove the Motor P.C.B..
remove the Motor P.C.B..
8.10.2.
Disassembly of Belt, Pully Gear,
Middle Gear and Drive Gear.
Middle Gear and Drive Gear.
• Refer to “Disassembly of Gear Box Assembly”
Step 1 : Remove Belt.
Step 2 : Remove 1 screw.
Click on the first or last page to see other SC-HC15EB / SC-HC15EG / SC-HC15EP service manuals if exist.