Panasonic SA-XH175EE / SA-XH175GS / SC-XH175EE Service Manual ▷ View online
45
10.3. Basic Troubleshooting Guide for Traverse Unit (Main P.C.B.)
Problems Checking
Points
Checking
components
b) Check video signals (CVBS)
LB8317, R8325, IC8011 (Pin 63)
a) Check SDRAM address, data
bus, CLK and other control signals
waveform
bus, CLK and other control signals
waveform
IC8051
1) Distorted picture or
abnormal sound is head
during the initialization
abnormal sound is head
during the initialization
c) Check audio DAC circuitry
* Compare the above with OK
condition DVD Module P.C.B
* Compare the above with OK
condition DVD Module P.C.B
LB8422 till LB8428
*Check for solder short and/or
component missing/damaged
*Check for solder short and/or
component missing/damaged
b) Check laser drive circuitry
(Voltages & current)
(Voltages & current)
Q8552, CL8532 (For DVD),
Q8562, CL8530 (For CD)
Q8562, CL8530 (For CD)
a) Check motor driver circuitry
(VCC PVCC)
(VCC PVCC)
IC8251 Pin 8, (+9V), 19 (+5V)
2) No TOC/Long TOC
c) Check LSI IC connection to
motor drive circuitry
motor drive circuitry
IC8001 Pin 90, 93, 94, 95
IC8251 Pin 11 to 18
IC8251 Pin 11 to 18
* Check for solder short and/or
component missing/damaged
component missing/damaged
a) Check connection from Main to
Traverse unit
Traverse unit
FP8251
3) Disc not spinning
4) Traverse not moving
5) Traverse and spindle
abnormal movement
4) Traverse not moving
5) Traverse and spindle
abnormal movement
b) Check motor driver circuitry on
the voltages and control signals
the voltages and control signals
IC8251
* Check for solder short and/or
component damaged
* Check for solder short and/or
component damaged
6) Cannot read the disc but
spindle motor is spinning
- Cannot read CD/DVD
spindle motor is spinning
- Cannot read CD/DVD
a) Check laser drive circuitry
(voltages and current)
(voltages and current)
- Check CD Laser Drive
- Check DVD Laser Drive
- Check DVD Laser Drive
* Check voltages and LD current
and compare with OK condition
Main P.C.B.
and compare with OK condition
Main P.C.B.
Q8552, LB8551
(For DVD Laser Drive current)
Q8562, LB8561
(For CD Laser Drive current)
(For DVD Laser Drive current)
Q8562, LB8561
(For CD Laser Drive current)
7) Block Noise during play
a) Check SDRAM address and
data bus signal
data bus signal
IC8051
8) Jitter out of specification
a) Check LD current
b) Check OPU
(Change to other unit and
confirmed operating condition)
b) Check OPU
(Change to other unit and
confirmed operating condition)
OPU Unit (Traverse unit), FPC
connection (FP8531 & FP8251)
connection (FP8531 & FP8251)
46
10.4. Basic Troubleshooting Guide for HDMI AV output
Problems Checking
Points
Checking
components
1) Check setting of the set in
Setup Menu whether the HDMI
Video output is turned ON
Setup Menu whether the HDMI
Video output is turned ON
* This year HDMI always ON.
No need to check Setup Menu.
If no resolution selection GUI,
then only check SETUP.
No need to check Setup Menu.
If no resolution selection GUI,
then only check SETUP.
2) +5V Supply to the TV
IC3952 (Pin 4)
3) HDMI Connector Solderability
condition
condition
P3901
4) HDMI Output TDMS signal
lines (IC3901)
lines (IC3901)
- Clock (TXCP/TXCN => Pin 50, 49)
- Data (TXD0P/TXD0N => Pin 52, 51)
- Data (TXD1P/TXD1N => Pin 54, 53)
- Data (TXD2P/TXD2N => Pin 56, 55)
- Data (TXD0P/TXD0N => Pin 52, 51)
- Data (TXD1P/TXD1N => Pin 54, 53)
- Data (TXD2P/TXD2N => Pin 56, 55)
HDMI Connector (P3901)
- Clock (TXCP/TXCN => Pin 10, 12)
- Data (TXD0P/TXD0N => Pin 7, 9)
- Data (TXD1P/TXD1N => Pin 4, 6)
- Data (TXD2P/TXD2N => Pin 1, 3)
- Data (TXD0P/TXD0N => Pin 7, 9)
- Data (TXD1P/TXD1N => Pin 4, 6)
- Data (TXD2P/TXD2N => Pin 1, 3)
- Data, DDCDAT (Pin 46, IC8001)
- Clock, DDCCLK (Pin 47, IC8001)
- Clock, DDCCLK (Pin 47, IC8001)
5) HDMI Transmitter communication
lines to TV
lines to TV
6) HDMI Transmitter communication
from DVD Decorder (IC8001) +3.3V
Supply
from DVD Decorder (IC8001) +3.3V
Supply
7) HDMI Transmitter DVD Decorder
(IC8001) +1.8 V Supply
(IC8001) +1.8 V Supply
8) Hot-Plug Signal
9) HDMI Interface Reference
Resistor
Resistor
1) Supply to HDMI transmitter
intergrated (IC8001)
2) Check for Capacitor short to GND
intergrated (IC8001)
2) Check for Capacitor short to GND
Check Digital Signal Data
communication lines from IC8001 to
Serial Flash IC (IC8651)
communication lines from IC8001 to
Serial Flash IC (IC8651)
Check the setting under 'SETUP'
menu if HDMI Audio Output option
is turned 'ON'
menu if HDMI Audio Output option
is turned 'ON'
- Clock (TXCP/TXCN => Pin 10, 12)
- Data (TXD0P/TXD0N => Pin 7, 9)
- Data (TXD1P/TXD1N => Pin 4, 6)
- Data (TXD2P/TXD2N => Pin 1, 3)
- Data (TXD0P/TXD0N => Pin 7, 9)
- Data (TXD1P/TXD1N => Pin 4, 6)
- Data (TXD2P/TXD2N => Pin 1, 3)
* Check for solder short/or
component missing on TDMS line
as well as signal intergrity HDMI
Connector (P3901)
component missing on TDMS line
as well as signal intergrity HDMI
Connector (P3901)
LB3905, R3905, Q3902, R3904
LB3904, R3907, Q3903, R3906
LB3904, R3907, Q3903, R3906
LB3901 (Pin 57)
LB3902, LB3910, R3910 (Pin 59)
LB3906, R3902, R3903, Q3901
C8034, C8006, C8029, C8028,
LB3901 (Pin 57), LB3902, LB3910
(Pin 59)
LB3901 (Pin 57), LB3902, LB3910
(Pin 59)
Pin 1, 2, 5, 6 (IC8651)
Pin 105, 106, 107, 109 (IC8001)
Pin 105, 106, 107, 109 (IC8001)
R3901
1) TV does not have any
display. Set FL display shows
U702/U703
display. Set FL display shows
U702/U703
2) When switching the video
output mode from 480p to
720p /1080i, TV display
become blank
output mode from 480p to
720p /1080i, TV display
become blank
3) Error Video Output.
TV screen shows green
Display
TV screen shows green
Display
4) No audio output from HDMI
47
11 Service Fixture & Tools
Prepare service tools before process service position.
Ref. No
Service Tools
Remarks
SFT1
Main P.C.B. (CN2006) - D-Amp P.C.B. (CN5402)
RFKZBTT270K3 (18P FFC)
48
12 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Top Cabinet
• Replacement of Tray Ornament
• Disassembly of Front Panel Block Assembly
• Disassembly of Operation Button P.C.B.
• Disassembly of Power Button P.C.B.
• Disassembly of Mic P.C.B.
• Disassembly of Panel P.C.B.
• Disassembly of Rear Panel
• Disassembly of Fan Unit
• Disassembly of Main P.C.B.
• Disassembly of D-Amp P.C.B.
• Replacement of Digital Amplifier IC (IC5100/IC5200/IC5300)
• Disassembly of AC Inlet P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Switching Regulator IC (IC5701)
• Replacement of Diode (D5702)
• Replacement of Diode (D5802)
• Replacement of Diode (D5803)
• Disassembly of DVD Mechanism Unit (BRS11D)
• Replacement of Traverse Unit.
• Disassembly of Top Cabinet
• Replacement of Tray Ornament
• Disassembly of Front Panel Block Assembly
• Disassembly of Operation Button P.C.B.
• Disassembly of Power Button P.C.B.
• Disassembly of Mic P.C.B.
• Disassembly of Panel P.C.B.
• Disassembly of Rear Panel
• Disassembly of Fan Unit
• Disassembly of Main P.C.B.
• Disassembly of D-Amp P.C.B.
• Replacement of Digital Amplifier IC (IC5100/IC5200/IC5300)
• Disassembly of AC Inlet P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Switching Regulator IC (IC5701)
• Replacement of Diode (D5702)
• Replacement of Diode (D5802)
• Replacement of Diode (D5803)
• Disassembly of DVD Mechanism Unit (BRS11D)
• Replacement of Traverse Unit.
12.1. Screw Type
Click on the first or last page to see other SA-XH175EE / SA-XH175GS / SC-XH175EE service manuals if exist.