Panasonic SA-XH175EE / SA-XH175GS / SC-XH175EE Service Manual ▷ View online
25
7.3.
Connection with an ARC compatible TV
26
8 Operating Instructions
8.1.
Removing of disc during abnormality
8.1.1.
Using main unit key buttons.
8.1.1.1.
When the power can be turned off.
1. Turn off the power and press & hold [OPEN/CLOSE] button on main unit and [SKIP FWD] button on remote for 5 seconds
8.1.1.2.
When the power cannot be turned off
1. Press & hold the [POWER] button to turn off the power forcibly, then press & hold [SKIP FWD] button on remote and [OPEN/
CLOSE] button on main unit for 5 seconds.
8.1.2.
When the Forcible Disc Eject cannot be done.
1. Turn off the power and remove AC cord.
2. Insert Paper Clip into the hole on the bottom of unit and slide the Paper Clip on the direction of the arrow to eject tray slightly.
2. Insert Paper Clip into the hole on the bottom of unit and slide the Paper Clip on the direction of the arrow to eject tray slightly.
The tray will open automatically.
27
3. Gently pull out the tray.
4. Remove disc
4. Remove disc
28
9 Service Mode
9.1.
Cold-Start
Here is the procedure to carry out cold-start for initialize to shipping mode.
1. Unplug AC power cord
2. Press & hold [
] button
3. Plug AC power cord while [
] button being pressed
FL Display will show “_ _ _ _ _ _ _ _”
4. Release [
] button
9.2.
Panel Code Setting Operation
9.2.1.
Checking of Panel Code
1. In STOP (no disc) mode, press [OPEN/CLOSE] button on main unit, and [6] button on the remote control unit.
FL Display:
Display is automatically clear after 5 seconds.
Note: Refer to Figure 9.2.1 for "Video Design Information".
Note: Refer to Figure 9.2.1 for "Video Design Information".
Click on the first or last page to see other SA-XH175EE / SA-XH175GS / SC-XH175EE service manuals if exist.