Panasonic SA-XH175EE / SA-XH175GS / SC-XH175EE Service Manual ▷ View online
53
Step 4 Release 2 catches.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted & fully catched onto the Tray.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted & fully catched onto the Tray.
Step 5 Remove the Tray Ornament in the direction of arrow.
Caution: During assembling, ensure the Tray Ornament's
guide rib is fully catched onto the Tray and fully inserted.
guide rib is fully catched onto the Tray and fully inserted.
Step 6 Slide the Tray in fully.
54
12.6. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”.
• Refer to "Replacement of Tray Ornament".
• Refer to "Replacement of Tray Ornament".
Step 1 Detach 4P Cable at the connector (CN6001) on Panel
P.C.B..
P.C.B..
Step 2 Release 2 tabs at each side of the Front Panel Block
Assembly in the direction of arrow.
Assembly in the direction of arrow.
Step 3 Release 3 tabs at the Bottom Chassis.
Caution: Do not exert strong force when releasing the tabs.
Caution: Do not exert strong force when releasing the tabs.
Caution: During assembling, ensure that the Front Panel
Block Assembly is properly inserted and fully catched
onto the Bottom Chassis
Block Assembly is properly inserted and fully catched
onto the Bottom Chassis
55
Step 4 Remove the Front Panel Block Assembly.
12.7. Disassembly of Operation But-
ton P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to "Replacement of Tray Ornament".
• Refer to "Disassembly of Front Panel Block Assembly".
• Refer to "Replacement of Tray Ornament".
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 2 screws.
Step 2 Release the 3P Cable from the ribs of the Front Panel
Block Assembly.
Caution: During assembling, dressed the 3P Cable in the
ribs of the Front Panel Block Assembly.
Block Assembly.
Caution: During assembling, dressed the 3P Cable in the
ribs of the Front Panel Block Assembly.
Step 3 Lift up the Operation Button P.C.B..
Caution: During assembling, ensure that the Operation
Button P.C.B. is properly located and fully seated onto the
Front Panel Block Assembly.
Caution: During assembling, ensure that the Operation
Button P.C.B. is properly located and fully seated onto the
Front Panel Block Assembly.
56
Step 4 Desolder the 3P Cable at the cable holder (H6003) on
the Operation Button P.C.B..
Step 5 Remove the Operation Button P.C.B..
the Operation Button P.C.B..
Step 5 Remove the Operation Button P.C.B..
12.8. Disassembly of Power Button
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to "Replacement of Tray Ornament".
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to "Replacement of Tray Ornament".
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Remove 1 screw.
Step 2 Release the 3P Cable from the ribs of the Front Panel
Block Assembly.
Caution: During assembling, dressed the 3P Cable in the
ribs of the Front Panel Block Assembly.
Block Assembly.
Caution: During assembling, dressed the 3P Cable in the
ribs of the Front Panel Block Assembly.
Step 3 Lift up the Power Button P.C.B..
Caution: During assembling, ensure that the Power Button
P.C.B. is properly located and fully seated onto the Front
Panel Block Assembly.
P.C.B. is properly located and fully seated onto the Front
Panel Block Assembly.
Click on the first or last page to see other SA-XH175EE / SA-XH175GS / SC-XH175EE service manuals if exist.