Panasonic SA-VK880EE / SC-VK880EE Service Manual ▷ View online
65
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 1) to (Step 3) of Item 9.13
• Follow the (Step 1) to (Step 4) of Item 9.14
• Follow the (Step 1) to (Step 3) of Item 9.13
• Follow the (Step 1) to (Step 4) of Item 9.14
9.16.1.
Replacement of Pinch Roller Ass’y
and Head Block Sub Ass’y
and Head Block Sub Ass’y
Step 1 Release catch to remove the Pinch Roller (F) Assy.
Step 2 Release catch to remove the Pinch Roller (R) Assy.
Step 2 Release catch to remove the Pinch Roller (R) Assy.
Step 3 Release the catches at the side of head connector.
Step 4 Detach the head connector as arrow shown.
Step 4 Detach the head connector as arrow shown.
Caution: Avoid exerting strong force as it may damage the
FFC.
FFC.
Step 5 Remove 2 screws.
Step 6 Remove Head Block Sub Ass’y as arrow shown.
66
9.16.2.
Replacement of Capstan Motor
Ass’y and Capstan Belt ‘A’
Ass’y and Capstan Belt ‘A’
• Follow the (Step 3) to (Step 4) of item 9.16.1.
- Disassembly of Capstan Motor Ass’y and Capstan Belt ‘A’
Step 1 Remove 3 screws.
Step 2 Lift up to remove the Sub-Chassis Ass’y.
Step 3 Remove 2 screws to remove Capstan Motor Ass’y.
Caution: Support Capstan Motor Ass’y by hand to prevent
it from falling during removal and assembly of Capstan
Motor Ass’y.
Caution: Support Capstan Motor Ass’y by hand to prevent
it from falling during removal and assembly of Capstan
Motor Ass’y.
67
Step 4 Remove Capstan Belt ‘A’.
- Assembly of Capstan Motor Ass’y and Capstan Belt ‘A’
Step 1 Coil Capstan Belt ‘A’ to Flywheel ‘F’ Ass’y, Flywheel ‘L’
and the 2 bosses temporarily as diagram shown.
Caution: Keep Capstan Belt ‘A’ away from grease during
assembly of Capstan Belt ‘A’.
and the 2 bosses temporarily as diagram shown.
Caution: Keep Capstan Belt ‘A’ away from grease during
assembly of Capstan Belt ‘A’.
68
Step 2 Fit the Capstan Motor Ass’y to the Sub-Chassis Ass’y.
Caution: Ensure it seats properly.
Step 3 Fix the Capstan Motor Ass’y to the Sub-Chassis Ass’y
by 2 screws.
Caution: Ensure it seats properly.
Step 3 Fix the Capstan Motor Ass’y to the Sub-Chassis Ass’y
by 2 screws.
Step 4 Install the Sub-Chassis Ass’y to the Deck Mechanism
Unit.
Caution: Ensure the Sub-Chassis Ass’y seats properly on
the bosses.
Unit.
Caution: Ensure the Sub-Chassis Ass’y seats properly on
the bosses.
Step 5 Fix 3 screws.
Step 6 Release Capstan Belt ‘A’ to the pulley of Capstan Motor
Ass’y as diagram shown.
Ass’y as diagram shown.
9.16.3.
Replacement of Winding Belt
• Follow the (Step 3) to (Step 4) of item 9.16.1.
• Follow the (Step 1) to (Step 4) of item 9.16.2.
• Follow the (Step 1) to (Step 4) of item 9.16.2.
- Disassembly of Winding Belt
Click on the first or last page to see other SA-VK880EE / SC-VK880EE service manuals if exist.