Panasonic SA-VK880EE / SC-VK880EE Service Manual ▷ View online
53
Step 5 Remove the top cabinet.
9.4.
Disassembly of DVD Mecha-
nism Unit (CR14D)
nism Unit (CR14D)
• Follow the (Step 1) to (Step 5) of Item 9.3
Step 1 Remove 1 screw at rear panel.
Step 2 Detach 50P FFC cable at the connector (CN2801) on
Main P.C.B.
Step 3 Detach 11P FFC cable at the connector (CN2805) on
Main P.C.B.
Step 4 Detach 5P cable at the connector (CN1113) on USB
P.C.B.
Main P.C.B.
Step 3 Detach 11P FFC cable at the connector (CN2805) on
Main P.C.B.
Step 4 Detach 5P cable at the connector (CN1113) on USB
P.C.B.
Step 5 Release the claws outwards on both sides.
54
Caution: During assembling, ensure the claws are fully
catched.
catched.
Step 6 Release the DVD Mechanism Unit (CR14D) from the
catches and locators.
Step 7 Lift up DVD Mechanism Unit (CR14D) in the direction of
arrow.
catches and locators.
Step 7 Lift up DVD Mechanism Unit (CR14D) in the direction of
arrow.
Caution: During assembling, ensure that the DVD Mecha-
nism Unit (CR14D) is seated properly at the locator.
nism Unit (CR14D) is seated properly at the locator.
Step 8 Detach 7P FFC at the connector (FP8251).
Step 9 Detach 26P FFC at the connector (FP8531).
Step 9 Detach 26P FFC at the connector (FP8531).
• For GC only
55
Step 10 Remove 7P FFC from the Ferrite Core.
Caution: Ensure that 7P FFC is properly slot through the
Ferrite Core.
Caution: Ensure that 7P FFC is properly slot through the
Ferrite Core.
• Disassembly of Mecha Chassis
Step 11 Remove 2 screws.
Step 12 Remove Mecha Chassis as arrow shown.
Step 12 Remove Mecha Chassis as arrow shown.
9.5.
Disassembly of DVD Module
P.C.B.
P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 9) of Item 9.4
• Follow the (Step 1) to (Step 9) of Item 9.4
Step 1 Remove 3 screws.
Step 2 Remove the shield plate unit.
Step 3 Remove DVD Module P.C.B..
Step 2 Remove the shield plate unit.
Step 3 Remove DVD Module P.C.B..
9.6.
Disassembly of Rear Panel
• Follow the (Step 1) to (Step 5) of Item 9.3
Step 1 Remove 10 screws at rear panel.
Step 2 Release 2 catches from the each side of the rear panel.
Step 2 Release 2 catches from the each side of the rear panel.
56
Step 3 Slightly lift up the DVD Mechanism Unit (CR14D) to
release from the two locators.
Step 4 Remove rear panel in the direction of arrow.
release from the two locators.
Step 4 Remove rear panel in the direction of arrow.
9.7.
Disassembly of Front Panel
Assembly
Assembly
• Follow the (Step 1) to (Step 5) of Item 9.3
Step 1 Detach 27P FFC at the connector (CN2807) on Main
P.C.B..
Step 2 Detach 2P cable at the connector (CN2813) on Main
P.C.B..
Step 3 Detach 5P cable at the connector (CN1113) on USB
P.C.B..
P.C.B..
Step 2 Detach 2P cable at the connector (CN2813) on Main
P.C.B..
Step 3 Detach 5P cable at the connector (CN1113) on USB
P.C.B..
Step 4 Detach 10P FFC at the connector (CN2752) on Main
P.C.B..
Step 5 Detach 12P FFC at the connector (CN2751) on Main
P.C.B..
Step 6 Detach 10P FFC at the connector (CN2806) on Main
P.C.B..
Step 7 Detach 2P cable at the connector (CN2812) on Main
P.C.B.
P.C.B..
Step 5 Detach 12P FFC at the connector (CN2751) on Main
P.C.B..
Step 6 Detach 10P FFC at the connector (CN2806) on Main
P.C.B..
Step 7 Detach 2P cable at the connector (CN2812) on Main
P.C.B.
Click on the first or last page to see other SA-VK880EE / SC-VK880EE service manuals if exist.