Panasonic SA-VK880EE / SC-VK880EE Service Manual ▷ View online
57
Step 8 Release the claws on both sides.
Step 9 Release catches at both side.
Caution: During assembling, ensure that both claws and
catches are fully catched.
Step 9 Release catches at both side.
Caution: During assembling, ensure that both claws and
catches are fully catched.
Step 10 Release the tabs at the bottom.
Caution: Do not exert strong force when releasing the tabs.
Step 11 Remove 1 screw to remove ground wire.
Step 12 Remove front panel assembly in the direction of arrow.
Step 12 Remove front panel assembly in the direction of arrow.
9.8.
Disassembly of Mic P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 1) to (Step 12) of Item 9.7
Step 1 Remove Mic knob.
58
Step 2 Detach 7P cable at the connector (CN6702) on Mic
P.C.B..
Step 3 Remove 1 screw on Mic P.C.B..
Step 4 Remove the Mic P.C.B..
P.C.B..
Step 3 Remove 1 screw on Mic P.C.B..
Step 4 Remove the Mic P.C.B..
9.9.
Disassembly of Panel P.C.B.,
Volume P.C.B. & Remote Sen-
sor P.C.B. , Side Bar (L) LED
P.C.B. and Side Bar (R) LED
P.C.B.
Volume P.C.B. & Remote Sen-
sor P.C.B. , Side Bar (L) LED
P.C.B. and Side Bar (R) LED
P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 2) of Item 9.8
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 2) of Item 9.8
Step 1 Remove volume knob.
Step 2 Detach 7P cable at the connector (CN6702) on Mic
P.C.B..
P.C.B..
Step 3 Remove 9 screws at Panel P.C.B..
59
Step 4 Remove 2 screws on Volume P.C.B..
Step 5 Release 2 catches at Panel P.C.B..
Step 6 Release 6 catches at Volume P.C.B..
Step 7 Release 2 catches at Remote Sensor P.C.B..
60
Step 8 Lift up the Panel P.C.B., Volume P.C.B. & Remote Sen-
sor P.C.B. altogether as arrow shown.
sor P.C.B. altogether as arrow shown.
• Disassembly of Side Bar (L) Led P.C.B. and Side Bar (R)
P.C.B.
Step 9 Detach Side Bar (L) P.C.B at the connector (CN6014)
on Panel P.C.B..
Step 10 Detach Side Bar (R) P.C.B at the connector (CN6012)
on Panel P.C.B..
Step 11 Remove the Side Bar (L) P.C.B. and Side Bar (R)
P.C.B..
on Panel P.C.B..
Step 10 Detach Side Bar (R) P.C.B at the connector (CN6012)
on Panel P.C.B..
Step 11 Remove the Side Bar (L) P.C.B. and Side Bar (R)
P.C.B..
Caution: During assembling, ensure that the diodes shown
on Volume P.C.B. are in upright position.
on Volume P.C.B. are in upright position.
Caution: During assembling, ensure that Dynamic Bass
Button is seated properly.
Button is seated properly.
9.10. Disassembly of USB P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 1) to (Step 12) of Item 9.7
Click on the first or last page to see other SA-VK880EE / SC-VK880EE service manuals if exist.