Panasonic SA-VK880EE / SC-VK880EE Service Manual ▷ View online
29
6.4.3.
Service Mode Table 3
FL Display
Key Operation
Front Key
Item
Description
Mode Name
Initialization
mode
Cancelled automatically
5 seconds later.
5 seconds later.
Initialization.
User settings are cancelled and player
is initialized to factory setting.
It is necessary when after replacement
of Micro-processor (DV5 LSI) IC,
FLASH ROM IC (IC8651), EEPROM
IC (IC8611) & DVD Module P.C.B.
User settings are cancelled and player
is initialized to factory setting.
It is necessary when after replacement
of Micro-processor (DV5 LSI) IC,
FLASH ROM IC (IC8651), EEPROM
IC (IC8611) & DVD Module P.C.B.
Cancelled automatically
5 seconds later.
5 seconds later.
Region code display, TV broadcasting
system & the model no. information.
system & the model no. information.
Note: Refer to Fig. 8.1 for "Video
Design Information".
Design Information".
Region display
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [6] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [6] button on the
remote control unit.
Region No.: 0-8
N: no PAL / P: PAL
N: NTSC / 6: PAL60
Model
No.
Information
No.
Information
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [ 10] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [ 10] button on the
remote control unit.
If the EEPROM version matches, checksum
[YYYY] is displayed.
[YYYY] is displayed.
If the version of the EEPROM does not match,
[NG] is displayed.
[NG] is displayed.
(a) If there is NO EEPROM header string
OR
(b) If there is no EEPROM (no data is received
by Micro-processor), [NO] is displayed.
OR
(b) If there is no EEPROM (no data is received
by Micro-processor), [NO] is displayed.
EEPROM
Checksum
(If applicable,
refer below.)
Checksum
(If applicable,
refer below.)
(Condition1)
Opecon
Version
Version
(Display 1)
(Display 2)
(Display 3)
(Condition 2)
(Condition 3)
Micro-processor
firmware version
display &
EEPROM
checksum
display.
Cancelled automatically
5 seconds later.
5 seconds later.
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [7] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [7] button on the
remote control unit.
Press [FL Display] button on
remote control unit for next
page. (FL Display)
remote control unit for next
page. (FL Display)
Micro-processor firmware version
display & EEPROM checksum display.
EEPROM checksum is only available
due to existence of EEPROM IC.
display & EEPROM checksum display.
EEPROM checksum is only available
due to existence of EEPROM IC.
Note: Condition 1/2/3 shows the state
of EEPROM IC. It is indicated in
Display 2.
of EEPROM IC. It is indicated in
Display 2.
FL Display sequence:
Display 1 2 3.
Display 1 2 3.
30
Figure 1 Video Design Information
English, Spanish,
Canadian, French
(S)
Japanese, English
English, French, German,
Spanish, Polish, Russian,
Czech, Hungarian
English, French, German,
Italian, Spanish, Polish,
Swedish, Dutch
English, French, German,
Spanish, Polish, Russian,
Czech, Hungarian
GA, GD,
GT, GJ
English, Traditional Chinese
English, French, German,
Italian, Spanish, Polish,
Swedish, Dutch
English, Spanish, French,
Brazilian Portuguese
English, French, German,
Spanish, Polish, Russian,
Czech, Hungarian
GK
English, Simplified Chinese
GN
EE
PN, PH, PU,
PR
EP
P, PC, PX
GC, GS
EB, EG
NTSC (*B)
Source
Output
Screen Saver
NTSC
NTSC disc
NTSC (default)
PAL60
PAL disc
PAL
NTSC (*A)
Source
Output
Screen Saver
NTSC
NTSC disc
NTSC
PAL disc
PAL (DVD-V)
NTSC (DVD-A/VCD)
NTSC (*D)
Source
Output
Screen Saver
NTSC
NTSC disc
NTSC
PAL disc
NTSC
PAL (*C)
Source
Output
Screen Saver
PAL
NTSC disc
PAL60 (default)
NTSC
PAL disc
PAL
Explanation of Display
Individual Model Code
Can play PAL disc
Region code
N: If NTSC disc is played, NTSC output.
6: If NTSC disc is played, PAL60 output.
6: If NTSC disc is played, PAL60 output.
2
6
5
4
4
2
2
1
2
3
Region
Code
NTSC
PAL
NTSC
PAL
SECAM
NTSC
PAL
PAL
PAL
NTSC
PAL
TV Broadcasting
System
Signal System
NTSC (*A)
NTSC (*D)
NTSC (*B)
PAL (*C)
PAL (*C)
PAL (*C)
PAL (*C)
PAL (*C)
NTSC (*A)
NTSC (*B)
(Default)
2PN
4PN
6PN
5P6
3PN
4P6
2P6
2P6
1PN
2P6
Region Display
(Default)
Product
Model Series
Japan
Hong Kong,
South East Asia,
Thailand,
Korea, Taiwan
New Zealand,
Australia
Central/South/
Latin America
China
CIS
Europe
USA, Canada, PX
Europe
Middle East
Country Region
OSD Menu Language
OSD
Default
English
English
English
English
English
English
English
English
English
Japanese
31
6.4.4.
Service Mode Table 4
FL Display
Key Operation
Front Key
Item
Description
Mode Name
Cancelled automatically
5 seconds later.
5 seconds later.
CPPM/CRM
Keys Check
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [DISC] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [DISC] button on the
remote control unit.
0: NG
1: OK
1: OK
0: NG
1: OK
1: OK
DVD Module
P.C.B. firmware
version display
Cancelled automatically
5 seconds later.
5 seconds later.
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [8] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [8] button on the
remote control unit.
System controller
generation
generation
Destination
System
controller
version
controller
version
Region No.: 0-8
DVD Module P.C.B. firmware version
is displayed on the FL Display.
The firmware version can be updated
using recovery disc.
is displayed on the FL Display.
The firmware version can be updated
using recovery disc.
Note: It is necessary to check for
firmware version before carrying out
the version up using the disc.
firmware version before carrying out
the version up using the disc.
CPPM/CRM refers to the Content
Protection for Recordable Media and
Pre-Recorded Media. It displays the
existence of the keys as "1" or "0".
OK: Existing of keys.
NG: Non existing of keys.
Protection for Recordable Media and
Pre-Recorded Media. It displays the
existence of the keys as "1" or "0".
OK: Existing of keys.
NG: Non existing of keys.
DVD Module
P.C.B. Reset
To reset DVD Module P.C.B.
This process is used when the DVD
Module P.C.B. or FLASH ROM
IC is replaced with a new one.
This process is used when the DVD
Module P.C.B. or FLASH ROM
IC is replaced with a new one.
While in initialization
mode, press & hold
[STOP] button on the main
unit, follow by [OK] button
on the remote control unit.
Cancelled automatically
5 seconds later.
mode, press & hold
[STOP] button on the main
unit, follow by [OK] button
on the remote control unit.
Cancelled automatically
5 seconds later.
32
6.4.5.
Service Mode Table 5
Timer 1 check
Cancelled automatically
5 seconds later.
5 seconds later.
DVD laser usage time
(Display 1)
(Display 2)
CD laser usage time
Cancelled automatically
5 seconds later
5 seconds later
Cancelled automatically
5 seconds later.
5 seconds later.
Cancelled automatically
5 seconds later.
5 seconds later.
Timer 1 reset
Timer 2 check
Timer 2 reset
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
While displaying Timer 1
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
While displaying Timer 2
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
Timer 1 check
Laser operation timer is measured
separately for DVD laser and CD laser.
Laser operation timer is measured
separately for DVD laser and CD laser.
FL Display sequence:
Display 1 2.
Display 1 2.
Press [FL Display] button for
next page of FL Display.
next page of FL Display.
Timer 1 reset
Laser operation timer of both DVD
laser and CD laser is reset all at once.
Laser operation timer of both DVD
laser and CD laser is reset all at once.
Timer 2 check
Spindle motor operation timer
Spindle motor operation timer
Timer 2 reset
Spindle motor operation timer
Spindle motor operation timer
Time is shown in 5 digits of decimal notation in
a unit of 1 hour.
"00000" will follow "99999".
a unit of 1 hour.
"00000" will follow "99999".
Shown to the above is DVD laser usage
time, and to the below is CD laser usage
time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999". (DVD laser)
time, and to the below is CD laser usage
time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999". (DVD laser)
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999". (CD laser)
in a unit of 10 hours.
"0000" will follow "9999". (CD laser)
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
It will clear to "0000" upon reset.
in a unit of 10 hours.
It will clear to "0000" upon reset.
Time is shown in 5 digits of decimal notation in
a unit of 1 hour.
It will be cleared to "00000" upon activating
this.
a unit of 1 hour.
It will be cleared to "00000" upon activating
this.
FL Display
Key Operation
Front Key
Item
Description
Mode Name
Click on the first or last page to see other SA-VK880EE / SC-VK880EE service manuals if exist.