Panasonic SA-PT880EE / SC-PT880EE Service Manual ▷ View online
53
Step 7 Remove iPod Cradle Assembly.
• Assembly of iPod Cradle Assembly
Step 1 Fix the iPod Cradle Assembly to Front Panel.
Step 2 Press the iPod Cradle Assembly downwards.
Note: A “click” sound can be heard when the iPod Cradle
Assembly is fixed onto Front Panel properly.
Note: A “click” sound can be heard when the iPod Cradle
Assembly is fixed onto Front Panel properly.
Step 3 Press the catch on the iPod Cradle Assembly.
Step 4 Fix 1 screw.
Step 4 Fix 1 screw.
54
8.12. Disassembly of iPod/iPhone
P.C.B.
• Refer to “Disassembly of iPod Cradle Assembly”
Step 1 Remove 2 screws.
Step 2 Remove iPod/iPhone P.C.B..
Caution: During assembling, ensure that iPod/iPhone
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
8.13. Disassembly of USB P.C.B.
• Refer to “Disassembly of Front Panel Block Assembly”
• Refer to (step1) to (step2) of item 8.9.
• Refer to (step1) to (step2) of item 8.9.
Step 1 Remove 1 screw.
Step 2 Remove USB Support P.C.B..
Step 3 Remove USB Ground Spring.
Step 4 Remove USB P.C.B..
Step 4 Remove USB P.C.B..
55
8.14. Disassembly of Mic P.C.B.
• Refer to “Disassembly of Front Panel Block Assembly”
Step 1 Remove 1 screw.
Step 2 Remove Mic Support P.C.B..
Step 2 Remove Mic Support P.C.B..
Step 3 Remove Mic P.C.B..
Caution: During assembling. dress 1P Ground wire
according to diagram shown.
according to diagram shown.
8.15. Replacement of DVD Lid Unit
• Refer to “Disassembly of Front Panel Block Assembly”
8.15.1.
Disassembly of DVD Lid Unit
Step 1 Push backward the Shaft B of the DVD Lid Unit in the
direction of arrow.
direction of arrow.
Step 2 Push forward the Shaft B of the DVD Lid Unit in the
direction of arrow.
direction of arrow.
56
Step 3 Lift the DVD Lid Spring at Shaft A in the direction of
arrow.
arrow.
Step 4 Move the Shaft A of the DVD Lid Unit in the direction of
arrow.
Step 5 Remove DVD Lid Unit.
arrow.
Step 5 Remove DVD Lid Unit.
Step 6 Move the DVD Lid Unit to remove from Front Panel.
8.15.2.
Assembly of DVD Lid Unit
Step 1 Insert the DVD Lid Unit into the Front Panel as arrow
shown.
Caution: Ensure that Shaft A of DVD Lid Unit is fully
inserted into Slot A of Front Panel.
shown.
Caution: Ensure that Shaft A of DVD Lid Unit is fully
inserted into Slot A of Front Panel.
Step 2 Locate DVD Lid Spring in between ribs of Front Panel.
Click on the first or last page to see other SA-PT880EE / SC-PT880EE service manuals if exist.