Panasonic SA-PT880EE / SC-PT880EE Service Manual ▷ View online
49
Step 2 Fix the Power Button P.C.B. onto the Front Panel.
Caution: Ensure that it is properly located & fully catched.
Caution: Ensure that it is properly located & fully catched.
Step 3 Fix 1 screw onto Power Button P.C.B..
Step 4 Dress 4P cable flatly against the Top Wall of Front
Panel.
Panel.
Step 5 Dress 4P cable into Front Panel’s U-Slot & Ribs accord-
ing to diagram shown.
ing to diagram shown.
50
8.10. Replacement of Cradle Lid
• Refer to “Disassembly of Front Panel Block Assembly”
8.10.1.
Disassembly of Cradle Lid
Step 1 Release the Cradle Lid Spring by using a Flat head
Screwdriver in the direction of arrow.
Screwdriver in the direction of arrow.
Step 2 Slightly push the Cradle Lid inwards.
Step 3 Slightly lift up the Cradle Lid.
Step 3 Slightly lift up the Cradle Lid.
51
Step 4 Rotate the Cradle Lid about 45
°
according to the dia-
gram shown.
Step 5 Remove Cradle Lid.
Step 5 Remove Cradle Lid.
8.10.2.
Assembly of Cradle Lid
Caution: During assembling, replace Cradle Lid Damper if
broken. Ensure it is properly pasted & fully pressed onto
Cradle Lid.
broken. Ensure it is properly pasted & fully pressed onto
Cradle Lid.
Step 1 Insert the Cradle Lid (Shaft A) into the Front Panel (Slot
A & Hole B).
A & Hole B).
Step 2 Slightly push the Cradle Lid inwards.
Step 3 Press the Cradle Lid downward.
Step 3 Press the Cradle Lid downward.
52
Step 4 Fix the Cradle Lid Spring onto Cradle Lid’s Shaft A.
8.11. Disassembly of iPod Cradle
Assembly
• Refer to “Disassembly of Front Panel Block Assembly”
Step 1 Detach 15P FFC at the connector (CN1002) on iPod/
iPhone P.C.B..
iPhone P.C.B..
Step 2 Remove 1 screw.
Step 3 Open the Front Lid Unit.
Step 4 Open the Cradle Lid.
Step 4 Open the Cradle Lid.
Step 5 Lift up iPod Cradle Assembly on both side.
Step 6 Press to release iPod Cradle Assembly from Front
Panel as arrow shown.
Panel as arrow shown.
Click on the first or last page to see other SA-PT880EE / SC-PT880EE service manuals if exist.