Panasonic SA-PT880EE / SC-PT880EE Service Manual ▷ View online
45
Step 6 Attach a short pin to the 24P FPC of the DVD Mecha-
nism Unit (DLS6E).
nism Unit (DLS6E).
• Assembly of DVD Mechanism Unit (DLS6E)
Step 1 Install the DVD Mechanism Unit (DLS6E).
Caution: Ensure that two guiding pins of DVD Mechanism
Unit (DLS6E) are fully inserted into two slots of Front
Panel.
Caution: Ensure that two guiding pins of DVD Mechanism
Unit (DLS6E) are fully inserted into two slots of Front
Panel.
Step 2 Place the DVD Mechanism Unit (DLS6E) onto the Bot-
tom Chassis.
tom Chassis.
Caution: During assembling, ensure that DVD Mechanism
Unit (DLS6E) is properly located and fully seated on Bot-
tom Chassis before screwing.
Unit (DLS6E) is properly located and fully seated on Bot-
tom Chassis before screwing.
Step 3 Fix 2 screws.
Step 4 Attach 7P FFC at the connector (FP8251) on Main
P.C.B..
Step 5 Attach 24P FFC at the connector (FP8531) on Main
P.C.B..
Step 4 Attach 7P FFC at the connector (FP8251) on Main
P.C.B..
Step 5 Attach 24P FFC at the connector (FP8531) on Main
P.C.B..
8.7.
Disassembly of Front Panel
Block Assembly
Block Assembly
• Refer to “Disassembly of Top Cabinet”
Step 1 Remove 2 rivets.
Caution: Keep the rivets in safe place, place it back during
assembling.
Step 2 Detach 15P FFC at the connector (CN2007) on Main
P.C.B..
Step 3 Detach 22P FFC at the connector (CN2002) on Main
P.C.B..
Caution: Keep the rivets in safe place, place it back during
assembling.
Step 2 Detach 15P FFC at the connector (CN2007) on Main
P.C.B..
Step 3 Detach 22P FFC at the connector (CN2002) on Main
P.C.B..
46
Step 4 Detach 8P FFC at the connector (CN2000) on Main
P.C.B..
P.C.B..
Step 5 Detach 5P wire at the connector (FP9001) on Main
P.C.B..
Step 6 Remove 1 screw to release 1P Ground Wire.
Caution: During assembling, ensure that 1P Ground Wire
is positioned properly before fixing screw.
P.C.B..
Step 6 Remove 1 screw to release 1P Ground Wire.
Caution: During assembling, ensure that 1P Ground Wire
is positioned properly before fixing screw.
Step 7 Release the 2 tabs at each side of the Front Panel Block
Assembly in the direction of arrow.
Assembly in the direction of arrow.
Step 8 Release the 3 tabs at the Bottom Chassis.
Caution: Do not exert strong force when releasing the tabs.
Caution: Do not exert strong force when releasing the tabs.
Step 9 Detach the Front Panel Block Assembly.
47
8.8.
Disassembly of FL P.C.B.
• Refer to “Disassembly of Front Panel Block Assembly”
Step 1 Remove 4 screws.
Step 2 Release 1 catch.
Step 3 Lift up FL P.C.B..
Step 4 Desolder 4P cable at the connector (CN6001) on FL
P.C.B..
Step 5 Remove FL P.C.B..
P.C.B..
Step 5 Remove FL P.C.B..
• Assembly of FL P.C.B.
Step 1 Solder 4P cable to the connector (CN6001) on FL
P.C.B..
P.C.B..
Step 2 Place FL P.C.B. onto Front Panel.
Caution: Ensure that it is properly located & fully catched.
Step 3 Dress 22P FFC (CN2002) on Main P.C.B..
Caution: Ensure that it is properly located & fully catched.
Step 3 Dress 22P FFC (CN2002) on Main P.C.B..
48
Step 4 Dress 4P cable into Front Panel’s ribs & USB P.C.B.
according to diagram shown.
Step 5 Dress 4P cable flatly against the wall of Front Panel.
according to diagram shown.
Step 5 Dress 4P cable flatly against the wall of Front Panel.
Step 6 Fix 4 screws to FL P.C.B..
8.9.
Disassembly of Power Button
P.C.B.
P.C.B.
• Refer to “Disassembly of Front Panel Block Assembly”
Step 1 Remove 1 screw.
Step 2 Lift up Power Button P.C.B..
Step 3 Desolder 4P Cable (H6803) on Power Button P.C.B..
Step 4 Remove Power Button P.C.B..
Step 4 Remove Power Button P.C.B..
• Assembly of Power Button P.C.B.
Step 1 Solder 4P cable at (H6803) onto Power Button P.C.B..
Click on the first or last page to see other SA-PT880EE / SC-PT880EE service manuals if exist.