Panasonic SA-PT880EE / SC-PT880EE Service Manual ▷ View online
41
8.2.
Main Components and P.C.B. Locations
42
8.3.
Disassembly of Top Cabinet
Step 1 Remove 2 screws.
Step 2 Remove 3 screws.
Step 3 Slightly pull both side of Top Cabinet outwards.
Step 4 Lift both side of Top Cabinet in an outward direction
about 25
about 25
°
.
Step 5 Press down the catches one by one.
Caution: To avoid shocked by electricity & injured by high
temperature. DO NOT TOUCH electrical components when
insert hand under the Top Cabinet.
Caution: To avoid shocked by electricity & injured by high
temperature. DO NOT TOUCH electrical components when
insert hand under the Top Cabinet.
Step 6 Remove Top Cabinet as arrow shown.
43
Caution: During assembling, ensure that catches of Top
Cabinet is insert into Front Panel properly.
Cabinet is insert into Front Panel properly.
Caution: Replace the insulator sheet if broken & ensure it
is pasted properly on the Top Cabinet.
is pasted properly on the Top Cabinet.
8.4.
Disassembly of AC Inlet P.C.B.
• Refer to “Disassembly of Top Cabinet”
Step 1 Remove 1 screw.
Step 2 Twist the Wire Holder.
Step 3 Release Red (TL10) & Black (TL20) wires from the Wire
Holder.
Caution: During assembling, ensure that Red (TL10) &
Black (TL20) wires are dressed into Wire Holder.
Step 4 Lift up AC Inlet P.C.B. as arrow shown.
Holder.
Caution: During assembling, ensure that Red (TL10) &
Black (TL20) wires are dressed into Wire Holder.
Step 4 Lift up AC Inlet P.C.B. as arrow shown.
Step 5 Desolder Red (TL10) & Black (TL20) Wires on AC Inlet
P.C.B..
Step 6 Remove AC Inlet P.C.B..
P.C.B..
Step 6 Remove AC Inlet P.C.B..
8.5.
Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Wireless adapter P.C.B..”
• Refer to “Disassembly of Wireless adapter P.C.B..”
Step 1 Twist the Wire Clamper.
Step 2 Detach the fan unit connector (CN5401) on D-Amp
P.C.B..
44
Step 3 Remove 8 screws.
Step 4 Release the tabs at both side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 5 Remove Rear Panel.
8.6.
Disassembly of DVD Mecha-
nism Unit (DLS6E)
nism Unit (DLS6E)
• Refer to “Disassembly of Top Cabinet”
Step 1 Detach 7P FFC at the connector (FP8251) on Main
P.C.B..
Step 2 Detach 24P PFC at the connector (FP8531) on Main
P.C.B..
Step 3 Remove 2 screws.
Step 4 Slightly lift up the DVD Mechanism Unit (DLS6E).
Step 5 Remove the DVD Mechanism Unit (DLS6E).
Step 5 Remove the DVD Mechanism Unit (DLS6E).
Click on the first or last page to see other SA-PT880EE / SC-PT880EE service manuals if exist.