Panasonic SA-PT560E / SA-PT560EB / SA-PT560EG Service Manual ▷ View online
9.6. Disassembly of DVD
Mechanism Unit
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 2 screws from DVD mechanism unit.
Step 2 Detach 7P FFC cable at the connector (FP8251) on
DVD Module P.C.B.
DVD Module P.C.B.
Step 3 Detach 26P FFC cable at the connector (FP8531) on
DVD Module P.C.B.
DVD Module P.C.B.
Step 4 Remove the DVD mechanism unit.
9.7. Disassembly of Front Panel
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Detach 17P FFC cable at the connector (CN2007) on
Main P.C.B.
Main P.C.B.
Step 2 Detach 4P FFC cable at the connector (CN2013) on
Main P.C.B.
Main P.C.B.
Step 3 Release the hook at each side of the front panel in the
direction of arrow.
direction of arrow.
Step 4 Release the tabs at the bottom of the front panel.
Caution: Do not exert strong force when releasing the tabs.
Step 5 Detach the front panel slightly forward in the direction of
arrows.
arrows.
Step 6 Detach 14P cable at the connector (CN6003) on Power
Supply P.C.B.
Supply P.C.B.
Step 7 Detach 5P USB cable at the connector (CN6401) on
USB P.C.B.
USB P.C.B.
Step 8 Remove the front panel.
45
SA-PT560E / SA-PT560EB / SA-PT560EG
Caution: Do not attempt to exert strong force when
detaching the front panel.
detaching the front panel.
9.8. Disassembly of Panel P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
Step 1 Remove the volume knob.
•
•
•
•
Disassembly of FL shield plate unit.
Step 2 Remove 3 screws from the FL shield plate unit.
Step 3 Remove the FL shield plate unit.
Caution Note: Keep the FL shield plate unit in safe place.
Avoid denting it. Place it back during assembling.
Avoid denting it. Place it back during assembling.
Step 4 Remove the earth spring.
Step 5 Remove 1 screw on Panel P.C.B.
Step 6 Release the catch.
Step 7 Remove Panel P.C.B.
Caution Note: Keep the earth spring in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
9.9. Disassembly of Power Button
P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Disassembly of Panel Angle.
Step 1 Remove 2 screws from the panel angle.
Step 2 Remove the panel angle.
Step 3 Remove Power Button P.C.B.
Caution Note: Keep the panel angle in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
9.10. Disassembly of USB P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Disassembly of USB Bracket.
46
SA-PT560E / SA-PT560EB / SA-PT560EG
Step 1 Remove 1 screw from the USB bracket.
Step 2 Remove the USB bracket.
Step 3 Remove the USB P.C.B.
9.11. Disassembly of DVD Lid
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 9.7.
•
•
•
•
Disassembly of DVD Lid Holder
Step 1 Remove 1 screw from the DVD lid holder.
Step 2 Remove the DVD lid holder.
Caution Note: Keep the DVD lid holder in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
Step 3 Open the DVD lid in the direction of arrow (1), until it is
aligned parallel with the front panel.
aligned parallel with the front panel.
Step 4 Lift the door spring in the direction of arrow (2).
Step 5 Move the shaft of the DVD lid in the direction of arrow
(3).
(3).
Step 6 Remove the DVD lid in the direction of arrow (4).
9.12. Disassembly of Ipod Cradle
P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Follow (Step 1) to (Step 7) of Item 9.6.
Step 1 Peel off the portion of the pana badge (paste type) with
a pen knife.
a pen knife.
Step 2 Remove the screw for cradle.
Caution Note: Keep the screw in safe place. Place it back
during assembling.
during assembling.
Step 3 Flip the Ipod cradle unit for 45 degree as the direction
of arrow.
of arrow.
47
SA-PT560E / SA-PT560EB / SA-PT560EG
Step 4 Remove theconnector cover.
Step 5 Use a flat head screwdriver (0.5-0.7mm) to release the
catches according to the diagram show.
catches according to the diagram show.
Step 6 Remove cradle cover A as the direction of arrow.
Step 7 Remove 2 screws on the Ipod cradle P.C.B.
Step 8 Remove Ipod cradle P.C.B.
9.13. Disassembly of AC Inlet P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 9.3.
•
•
•
•
Disassembly of AC Inlet Shield Plate Unit.
Step 1 Remove 1 screw at the rear panel.
Step 2 Remove 2 screws from the AC Inlet shield plate unit.
Step 3 Remove the AC Inlet shield plate unit.
Caution Note: Keep the AC Inlet shield plate unit in safe
place. Avoid denting it. Place it back during assembling.
place. Avoid denting it. Place it back during assembling.
Step 4 Remove the D-Amp P.C.B. bracket.
Step 5 Remove AC Inlet P.C.B.
Caution Note: Keep the D-Amp P.C.B. bracket in safe
48
SA-PT560E / SA-PT560EB / SA-PT560EG
Click on the first or last page to see other SA-PT560E / SA-PT560EB / SA-PT560EG service manuals if exist.