DOWNLOAD Panasonic SA-PT22GC / SA-PT22GW Service Manual ↓ Size: 6.62 MB | Pages: 122 in PDF or view online for FREE

25

Error

Code

H01

Tray loading error

The tray opening and closing is abnormal. 

Press [     STOP] on main  

CLOSE and OPEN of the tray cannot be   

unit for next error.

carried out properly. Loading motor error,  

(OPEN time: OPEN

DV5 LSI IC (IC8001) error.

CLOSE         OPEN      

H01 at CLOSE: CLOSE

OPEN         CLOSE H01)

H02

Spindle servo error

The spindle servo/motor is abnormal. The 

Press [     STOP] on main

FG pulse is abnormal. CLV servo error. 

unit for next error.

H03

Traverse motor error

The traverse is abnormal. (Traverse servo, 

Press [     STOP] on main

DV5 LSI IC (IC8001), TRV motor error.) 

unit for next error.

H04

Tracking servo error

Tracking coil NG (OPU unit abnormal),

Press [     STOP] on main

DV5 LSI IC (IC8001) error.

unit for next error.

H05

Seek time out error

It is not possible to access the disc. TOC

Press [     STOP] on main

cannot read. Abnormal disc etc. Pickup

unit for next error.

abnormal or disk is dirty. (TRV motor 

error, DV5 LSI IC (IC8001) error.) 

H07

Driver IC thermal shut

The spindle motor is abnormal. 

Press [     STOP] on main

down

(short between brushes)

unit for next error.

U11

Focus servo error

Focus coil, FE signal error. Disc may be 

Press [     STOP] on main

dirty.

unit for next error.

(Unfinalized DVD-R

is likely to become 

U11.)

Description of error

Automatic FL Display

Remarks

Diagnosis  Contents

26

Error

Code

U702 HDMI/DVI I2C

The communication error of I2C when

Press [     STOP] on main

communication error

connecting it with HDMI/DVI. For

unit for next error.

instance, when EDID information to which

information on the TV set side has been

described cannot be read, it is generated.

U703 HDMI/DVI attestation

When attestation (HDCP) with the TV

Press [     STOP] on main

error

side fails when connecting it with  

unit for next error.

HDMI/DVI, it is generated.

U704 HDMI/DVI SRM

It is generated at the equipment to which

Press [     STOP] on main

Riborcerar

the TV set is Riborced when connecting it

unit for next error.

with HDMI/DVI.

U705 HDMI/DVI SRM disk

It is generated at the time of it is time

Press [     STOP] on main

falsification check 

when illegal the SRM data of the  

unit for next error.

error

reproducing disk (verify error), when  

connecting it with HDMI/DVI.

F740 HDMI device key

I2C error when writing HDMI Key device

Press [     STOP] on main

into transmitter. 

unit for next error.

F893 FLASH ROM IC data 

Firmware error, DV5.0 LSI IC (IC8651)

Press [     STOP] on main

falsification error

error.

unit for next error.

F894 EEPROM IC

When failing in the access to EEPROM 

Press [     STOP] on main

abnormality error

IC located in the DVD Module P.C.B. 

unit for next error.

(IC8611).

F895 Language area 

Firmware version agreement check for  

Press [     STOP] on main

abnormal

factory preset setting failure prevention. 

unit for next error.

F897 Initialization 

Incomplete initialization after writing of 

Press [     STOP] on main

error

new firmware (Factory preset setting  

unit for next error.

failure prevention)

F899 The communication

Unsuitable combination of number of  

Press [     STOP] on main

specification 

system com and panel com used.

unit for next error.

disagreement

(Frimware)

between 

micro-processor

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

27

Error

Code

F61

The abnormalities

in the D-Amp related

problem (over-

temperature/shutdown)

In normal operation, when DCDET2 goes

Press [     STOP] on main

to "L" (Low) (Not during POWER OFF

unit for next error.

condition),  F61 appears on FL Display  

for 1 second and PCONT goes to

 "L" (Low).This is due to speaker output

has DC voltage.

F76

Abnormality in the 

In normal operation when DCDET1 is

Press [     STOP] on main

output voltage of 

detected "L" (Low) for two consecutive 

unit for next error.

stabilized power 

times, F76 is displayed on FL for 

supply

1 second and after that PCONT will be  

turned to "L" (Low). This is due to any of 

the DC voltages (+9V, +7V, -7V, +5V, 

+5.3V etc.) not available.

Diagnosis Contents

Description of error

Automatic FL Display

Remarks

28

This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function.
“LOCKED” is displayed on the unit, and ordinary operation is disabled.

• Prohibiting removal of disc

1. Select the DVD/CD function.
2. At POWER ON condition, press and hold down the [ ] button and then [POWER] button on the main unit for at least three

seconds. (The message, “LOCKED” appears when the function is activated.)

OPEN/CLOSE 

 button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.

• Prohibiting operation of selector and disc

1. Select the DVD/CD function.
2. At POWER ON condition, press and hold down the [ ] button and the [POWER] button on the main unit for at least three

seconds. (The message, “LOCKED” appears when the function is activated.)

The following buttons are invalid and the main unit displays “LOCKED” while the lock function mode is entered.

 The lock can be cancelled by the same procedure as used in setting.(“UNLOCK” is displayed on cancellation) At normal Power
ON/OFF the LOCKED condition is not cleared.However AC Power ON/OFF should clear LOCKED condition).

Main unit

OPEN/CLOSE, , 

 Remote con-

troller unit

EXT-IN, REPEAT, RADIO, NUMERIC KEYS 0~9, 

,

,

,

,

,

,

,

RETURN, FUNCTIONS,

FL DISPLAY/SLEEP, MUTE