Panasonic SA-PM200EB / SA-PM200EG / SA-PM200EP / SC-PM200EP Service Manual ▷ View online
33
8.7.
Disassembly of Panel & Tact
Switch P.C.B.
Switch P.C.B.
• Refer to “Disassembly of Top Cabinet Block”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove Volume Knob.
Step 2 : Remove 2 screws from Panel P.C.B..
Step 3 : Remove 6 screws from Tact Switch P.C.B..
Step 4 : Release 3 Catches.
34
Step 5 : Lift up Panel P.C.B. & Tact Switch P.C.B. together.
Caution : During assembling, ensure the Panel P.C.B. &
Tact Switch P.C.B. is fully catched & properly seated onto
the locator.
Tact Switch P.C.B. is fully catched & properly seated onto
the locator.
Step 6 : Desolder pins of the Connector (ZJ901) on the solder
side of Tact Switch P.C.B. & remove Panel P.C.B. and Tact
Switch P.C.B. together.
side of Tact Switch P.C.B. & remove Panel P.C.B. and Tact
Switch P.C.B. together.
Caution : Ensure that 5P Cable are properly dressed as
shown during assembling of the Panel & Tact Switch
P.C.B..
shown during assembling of the Panel & Tact Switch
P.C.B..
35
8.8.
Disassembly of USB P.C.B.
• Refer to “Disassembly of Top Cabinet Block”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel & Tact Switch P.C.B.”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Panel & Tact Switch P.C.B.”
Step 1 : Remove 1 screw.
Step 2 : Remove USB P.C.B. as shown.
Caution : During assembling, ensure the USB P.C.B. is slot
into the guide.
Caution : During assembling, ensure the USB P.C.B. is slot
into the guide.
8.9.
Disassembly of Display Win-
dow Assembly
dow Assembly
• Refer to “Disassembly of Top Cabinet Block”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Release catches by pushing the edge of the catches
as arrows shown.
Caution : Do not apply strong force during the release of
catches to avoid damage to the Front Panel Block & Dis-
play Window Assembly.
as arrows shown.
Caution : Do not apply strong force during the release of
catches to avoid damage to the Front Panel Block & Dis-
play Window Assembly.
Step 2 : Release catches by pushing the edge of the catches
as arrows shown.
Caution : Do not apply strong force during the release of
catches to avoid damage to the Front Panel Block & Dis-
play Window Assembly.
as arrows shown.
Caution : Do not apply strong force during the release of
catches to avoid damage to the Front Panel Block & Dis-
play Window Assembly.
36
Step 3 : Remove Display Window Assembly.
8.10. Disassembly of CD Lid
• Refer to “Disassembly of Top Cabinet Block”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Lift the spring out of the hook.
Caution : Keep the spring in a safe place and place it back
during assembling.
Caution : Keep the spring in a safe place and place it back
during assembling.
Click on the first or last page to see other SA-PM200EB / SA-PM200EG / SA-PM200EP / SC-PM200EP service manuals if exist.