Panasonic SA-PM200EB / SA-PM200EG / SA-PM200EP / SC-PM200EP Service Manual ▷ View online
29
8.3.
Main Parts Location Diagram
30
8.4.
Disassembly of Top Cabinet
Block
Block
Step 1 : Remove 2 screws.
Step 2 : Remove 2 screws.
Step 3 : Remove 2 screws.
Step 4 : Lift up & release the catches of the Top Cabinet Block.
Caution : During assembling, ensure the Top Cabinet
Block is seated properly.
Caution : During assembling, ensure the Top Cabinet
Block is seated properly.
31
Step 5 : Detach 7P FFC at connector (CN906) on Headphone
P.C.B..
Step 6 : Remove Top Cabinet Block.
P.C.B..
Step 6 : Remove Top Cabinet Block.
8.5.
Disassembly of Headphone
P.C.B.
P.C.B.
• Refer to “Disassembly of Top Cabinet Block”
Step 1 : Remove 2 screws.
Step 2 : Remove Headphone P.C.B..
Caution : During assembling, ensure the Headphone P.C.B.
is seated properly on the locator.
Caution : During assembling, ensure the Headphone P.C.B.
is seated properly on the locator.
32
8.6.
Disassembly of Front Panel
Block
Block
• Refer to “Disassembly of Top Cabinet Block”
Step 1 : Detach 12P FFC at the connector (CN900) on the
Panel P.C.B..
Step 2 : Detach 5P wire at the connector (CN901) on the USB
P.C.B..
Panel P.C.B..
Step 2 : Detach 5P wire at the connector (CN901) on the USB
P.C.B..
Step 3 : Release both locators.
Step 4 : Release 3 catches from the bottom.
Step 5 : Remove Front Panel Block.
Caution 1 : Do not attempt to exert strong force when
detaching the Front Panel Block.
Caution 2 : During assembling, ensure the Front Panel
Block is fully catched onto rear cabinet block.
Step 4 : Release 3 catches from the bottom.
Step 5 : Remove Front Panel Block.
Caution 1 : Do not attempt to exert strong force when
detaching the Front Panel Block.
Caution 2 : During assembling, ensure the Front Panel
Block is fully catched onto rear cabinet block.
Click on the first or last page to see other SA-PM200EB / SA-PM200EG / SA-PM200EP / SC-PM200EP service manuals if exist.