DOWNLOAD Panasonic SA-MAX700GSK Service Manual ↓ Size: 12.16 MB | Pages: 124 in PDF or view online for FREE

37

• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.

 
Step 1 Remove the Mic Knob.

Step 2 Detach 8P Cable at a connector (CN6103) on the Mic
P.C.B..

Step 3 Remove 2 screws.
Step 4 Remove the Mic P.C.B..
Caution: During assembling, ensure that the Mic P.C.B. is 
properly located & fully seated onto the Front Panel Unit.

• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.

 
Step 1 Remove 2 screws.
Step 2 Detach 4P Cable at a connector (CN5700) on LED
P.C.B..

Step 3 Release 2 catches.
Step 4 Remove LED P.C.B..
Caution: During assembling, ensure that the LED P.C.B. is 
properly located and fully catched onto Lighting House.

38

• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.

 
Step 1 Remove the spring as arrow shown in order of
sequence (1) to (3).
Caution: During assembling, ensure that the spring is 
assembly at correct position.

Step 2 Remove the CD Lid as arrow shown.
Step 3 Remove the CD Lid from the guide.

39

• Refer to “Disassembly of Top Cabinet”.

 
Step 1 Remove 9 screws.

Step 2 Detach the Voltage Selector P.C.B. from Rear Panel.
Step 3 Release catches on fans.
Step 4 Remove 2 fans.

Step 5 Release 2 tabs.
Step 6 Remove the Rear Panel.

40

• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.

 
Step 1 Remove 2 screws.

Step 2 Detach 10P FFC at the connector (FP8252) on the Main
P.C.B..
Step 3 Detach 24P FFC at the connector (FP8202) on the Main
P.C.B..

• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of Rear Panel”.
• Refer to “Disassembly of CD Mechanism Unit”.

 
Step 1 Detach 2P Wire at the connector (CN2007) on the Main
P.C.B..
Step 2 Detach 2P Wire at the connector (CN2009) on the Main
P.C.B..
Step 3 Detach 2P Wire at the connector (CN2006) on the Main
P.C.B..
Step 4 Detach 13P Cable at the connector (CN5802) on the
SMPS  P.C.B..

Step 5 Remove 2 screws.
Step 6 Lift up to remove the Main P.C.B..
Caution: During assembling, ensure that the Main P.C.B. is 
properly located & fully seated onto the Inner Chassis Unit.