Panasonic SA-MAX700GSK Service Manual ▷ View online
49
10.25. Disassembly of CD Interface
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of CD Mechanism Unit”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of CD Mechanism Unit”.
Step 1 Remove 3 screws.
Step 2 Desolder pins of the motor (M7301).
Step 3 Desolder pins of the motor (M7302).
Step 4 Remove the CD Interface P.C.B..
50
11 Service Position
Note: For description of the disassembly procedures, see
the Section 10.
the Section 10.
11.1. Checking of FL Display P.C.B.,
Control P.C.B., Volume P.C.B.,
Mic P.C.B. and USB P.C.B.
Mic P.C.B. and USB P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove FL Display P.C.B..
Step 4 Remove Illumination Button P.C.B..
Step 5 Remove Control P.C.B..
Step 6 Remove Volume P.C.B..
Step 7 Remove USB P.C.B..
Step 8 Remove Mic P.C.B..
Step 9 Attach 10P FFC at a connector (CN2002) on the Main
P.C.B..
Step 10 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 11 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 2 Remove Front Panel Unit.
Step 3 Remove FL Display P.C.B..
Step 4 Remove Illumination Button P.C.B..
Step 5 Remove Control P.C.B..
Step 6 Remove Volume P.C.B..
Step 7 Remove USB P.C.B..
Step 8 Remove Mic P.C.B..
Step 9 Attach 10P FFC at a connector (CN2002) on the Main
P.C.B..
Step 10 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 11 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 12 Attach 2P Cable at a connector (CN6800) on the Illu-
mination Button P.C.B..
Step 13 Attach 8P Cable at a connector (CN6103) on the Mic
P.C.B..
Step 14 Attach 12P Cable at a connector (CN6200) on the
Control P.C.B..
Step 15 Attach 30P FFC at a connector (CN6002) on the FL
Display P.C.B..
Step 16 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 17 FL Display P.C.B., Control P.C.B., Volume P.C.B., Mic
P.C.B. and USB P.C.B. can be checked as diagram shown.
mination Button P.C.B..
Step 13 Attach 8P Cable at a connector (CN6103) on the Mic
P.C.B..
Step 14 Attach 12P Cable at a connector (CN6200) on the
Control P.C.B..
Step 15 Attach 30P FFC at a connector (CN6002) on the FL
Display P.C.B..
Step 16 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 17 FL Display P.C.B., Control P.C.B., Volume P.C.B., Mic
P.C.B. and USB P.C.B. can be checked as diagram shown.
51
11.2. Checking of Main P.C.B. (Side
B)
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove CD Mechanism Unit.
Step 5 Remove Main P.C.B..
Step 6 Attach 24P FFC at the connector (FP8202) on the Main
P.C.B..
Step 7 Attach 10P FFC at the connector (FP8252) on the Main
P.C.B..
Step 8 Attach 13P Cable at the connector (CN5802) on the
SMPS P.C.B..
Step 9 Attach 2P Wire at the connector (CN2006) on the Main
P.C.B...
Step 10 Attach 2P Wire at the connector (CN2009) on the Main
P.C.B..
Step 11 Attach 2P Wire at the connector (CN2007) on the Main
P.C.B..
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove CD Mechanism Unit.
Step 5 Remove Main P.C.B..
Step 6 Attach 24P FFC at the connector (FP8202) on the Main
P.C.B..
Step 7 Attach 10P FFC at the connector (FP8252) on the Main
P.C.B..
Step 8 Attach 13P Cable at the connector (CN5802) on the
SMPS P.C.B..
Step 9 Attach 2P Wire at the connector (CN2006) on the Main
P.C.B...
Step 10 Attach 2P Wire at the connector (CN2009) on the Main
P.C.B..
Step 11 Attach 2P Wire at the connector (CN2007) on the Main
P.C.B..
Step 12 Attach 10P FFC at a connector (CN2002) on the Main
P.C.B..
Step 13 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 14 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 15 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 16 Side B Main P.C.B. can be checked as diagram shown.
P.C.B..
Step 13 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 14 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 15 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 16 Side B Main P.C.B. can be checked as diagram shown.
52
11.3. Checking of Main P.C.B. (Side
A)
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove CD Mechanism Unit.
Step 5 Remove Main P.C.B..
Step 6 Attach 24P FFC at the connector (FP8202) on the Main
P.C.B..
Step 7 Attach 10P FFC at the connector (FP8252) on the Main
P.C.B..
Step 8 Attach 13P Cable at the connector (CN5802) on the
SMPS P.C.B..
Step 9 Attach 2P Wire at the connector (CN2006) on the Main
P.C.B...
Step 10 Attach 2P Wire at the connector (CN2009) on the Main
P.C.B..
Step 11 Attach 2P Wire at the connector (CN2007) on the Main
P.C.B..
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove CD Mechanism Unit.
Step 5 Remove Main P.C.B..
Step 6 Attach 24P FFC at the connector (FP8202) on the Main
P.C.B..
Step 7 Attach 10P FFC at the connector (FP8252) on the Main
P.C.B..
Step 8 Attach 13P Cable at the connector (CN5802) on the
SMPS P.C.B..
Step 9 Attach 2P Wire at the connector (CN2006) on the Main
P.C.B...
Step 10 Attach 2P Wire at the connector (CN2009) on the Main
P.C.B..
Step 11 Attach 2P Wire at the connector (CN2007) on the Main
P.C.B..
Step 12 Upset the Main P.C.B..
Step 13 Attach 10P FFC at a connector (CN2002) on the Main
P.C.B..
Step 14 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 15 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 16 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 17 Side A Main P.C.B. can be checked as diagram shown.
P.C.B..
Step 14 Attach 11P Cable at a connector (CN2001) on the
Main P.C.B..
Step 15 Attach 30P FFC at a connector (CN2004) on the Main
P.C.B..
Step 16 Attach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 17 Side A Main P.C.B. can be checked as diagram shown.
Click on the first or last page to see other SA-MAX700GSK service manuals if exist.