Panasonic SA-MAX700GSK Service Manual ▷ View online
29
10.3. Main Components and P.C.B. Locations
30
10.4. Disassembly of Top Cabinet
Step 1 Remove 3 screws.
Step 2 Remove 3 screws.
Step 3 Remove 5 screws.
Step 4 Slightly release both sides of the Top Cabinet outwards
as arrow shown.
Step 4 Slightly release both sides of the Top Cabinet outwards
as arrow shown.
Step 5 Slightly lift up the Top Cabinet.
Step 6 Remove the Top Cabinet.
Step 6 Remove the Top Cabinet.
Caution: During assembling, ensure that the catches of the
Top Cabinet catches are properly located & inserted into
the Front Panel Unit as shown.
Top Cabinet catches are properly located & inserted into
the Front Panel Unit as shown.
31
10.5. Disassembly of Front Panel
Unit
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 1 screw.
Step 2 Detach 10P FFC at the connector (CN2002) on Main
P.C.B..
Step 3 Detach 11P Cable at the connector (CN2001) on Main
P.C.B..
Step 4 Detach 30P FFC at the connector (CN2004) on Main
P.C.B..
Step 5 Detach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 6 Release tabs at the bottom of the unit.
Step 7 Remove the Front Panel Unit
10.6. Disassembly of FL Display
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 6 screws.
Step 2 Release 4 catches.
Step 3 Lift up the FL Display P.C.B..
32
Step 4 Detach 30P FFC at a connector (CN6002) on the FL
Display P.C.B..
Display P.C.B..
Caution: During assembling, ensure that the FL Display
P.C.B. is properly located and fully catched onto Front
Panel Unit.
P.C.B. is properly located and fully catched onto Front
Panel Unit.
10.7. Disassembly of Illumination
Button P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 2 screws.
Step 2 Detach 2P Cable at a connector (CN6800) on the Illumi-
nation Button P.C.B..
Step 3 Lift up to remove the Illumination Button P.C.B..
10.8. Disassembly of Control P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of FL Display P.C.B.”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of FL Display P.C.B.”.
Step 1 Remove the Control Knob.
Click on the first or last page to see other SA-MAX700GSK service manuals if exist.