Panasonic SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK Service Manual ▷ View online
109
Step 5 Remove the Switching Regulator Unit in the direction of
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
Step 6 Remove 1 screw from the Switching Regulator IC
(IC5701).
Step 7 Remove the Switching Regulator IC (IC5701) from the
Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.5) for
location of the part.
(IC5701).
Step 7 Remove the Switching Regulator IC (IC5701) from the
Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.5) for
location of the part.
10.22.2. Assembly of Switching Regulator
IC (IC5701)
Step 1 Apply Grease to the back of Switching Regulator IC
(IC5701).
Step 2 Fix & screw the Switching Regulator IC (IC5701) to the
Heatsink A.
Caution: Ensure that the Switching Regulator IC (IC5701) is
properly fixed & fully screwed onto Heatsink A.
(IC5701).
Step 2 Fix & screw the Switching Regulator IC (IC5701) to the
Heatsink A.
Caution: Ensure that the Switching Regulator IC (IC5701) is
properly fixed & fully screwed onto Heatsink A.
Step 3 Fix the Switching Regulator Unit onto SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
110
Step 4 Solder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
10.23. Replacement of Rectifier Diode
(D5702)
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of SMPS P.C.B.”.
• Refer to “Disassembly of SMPS P.C.B.”.
10.23.1. Disassembly of Rectifier Diode
(D5702)
Step 1 Place SMPS P.C.B. on an insulated material.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
111
Step 5 Remove the Switching Regulator Unit in the direction of
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
Step 6 Remove 1 screw from the Rectifier Diode (D5702).
Step 7 Remove Rectifier Diode (D5702) from the Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.5) for
location of the part.
Step 7 Remove Rectifier Diode (D5702) from the Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.5) for
location of the part.
10.23.2. Assembly of Rectifier Diode
(D5702)
Step 1 Apply Grease to the back of Rectifier Diode (D5702).
Step 2 Fix & screw the Rectifier Diode (D5702) to the Heatsink
A.
Caution: Ensure that Rectifier Diode (D5702) is properly
fixed & screwed onto Switching Regulator Unit.
Step 2 Fix & screw the Rectifier Diode (D5702) to the Heatsink
A.
Caution: Ensure that Rectifier Diode (D5702) is properly
fixed & screwed onto Switching Regulator Unit.
Step 3 Fix the Switching Regulator Unit onto SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
112
Step 4 Solder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
10.24. Replacement of Thermal Diode
(D5802)
• Refer to “Disassembly of Top Cabinet.”.
• Refer to “Disassembly of SMPS P.C.B.”.
• Refer to “Disassembly of SMPS P.C.B.”.
10.24.1. Replacement of Thermal Diode
(D5802)
Step 1 Place SMPS P.C.B. on an insulated material.
Step 2 Desolder pins of the Thermal Diode (D5802) on the sol-
der side of SMPS P.C.B..
Step 2 Desolder pins of the Thermal Diode (D5802) on the sol-
der side of SMPS P.C.B..
Click on the first or last page to see other SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK service manuals if exist.