Panasonic SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK Service Manual ▷ View online
101
Step 5 Fix 4 screws.
Caution: During assembling, ensure that screwing
sequence is strictly follow to the illustration shown.
Note: For assembling of Digital Amplifier IC (IC5200) &
(IC5300), repeat the (Step 1) to (Step 5) of 10.18.2.
Caution: During assembling, ensure that screwing
sequence is strictly follow to the illustration shown.
Note: For assembling of Digital Amplifier IC (IC5200) &
(IC5300), repeat the (Step 1) to (Step 5) of 10.18.2.
10.19. Disassembly of Digital P.CB.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Detach 4P FFC at the connector (P55006) on Digital
P.C.B..
Step 2 Detach 45P FFC at the connector (P55001) on Digital
P.C.B..
Step 3 Detach 5P FFC at the connector (P55007) on Digital
P.C.B..
Step 4 Detach 5P FFC at the connector (P55008) on Digital
P.C.B..
Step 5 Detach 5P Cable at the connector (CN2001) on Digital
P.C.B..
102
Step 6 Lift up the Himelon.
Caution: Replace the Himelon if torn.
Step 7 Detach 11P FFC at the connector (CN1101) on Digital
P.C.B..
Step 8 Detach 3P Wire at the connector (P59300) on Digital
P.C.B..
Step 9 Detach 4P Shield Wire Unit at the connector (P59303)
on Digital P.C.B..
Caution: Replace the Himelon if torn.
Step 7 Detach 11P FFC at the connector (CN1101) on Digital
P.C.B..
Step 8 Detach 3P Wire at the connector (P59300) on Digital
P.C.B..
Step 9 Detach 4P Shield Wire Unit at the connector (P59303)
on Digital P.C.B..
Step 10 Detach 13P Cable at the connector (CN2002) on Digi-
tal P.C.B..
Step 11 Detach 10P Cable at the connector (CN2004) on Digi-
tal P.C.B..
tal P.C.B..
Step 11 Detach 10P Cable at the connector (CN2004) on Digi-
tal P.C.B..
103
Caution: During assembling, ensure that the Gasket is
properly inserted & fully fixed onto Bottom Chassis.
Step 12 Remove 1 rivet.
Caution: Keep the Rivet in safe place, place it back during
assembling.
Step 13 Detach 22P FFC at the connector (CN2000) on Digital
P.C.B..
Step 14 Detach 18P FFC at the connector (CN2006) on Digital
P.C.B..
Step 15 Detach 17P FFC at the connector (CN2008) on Digital
P.C.B..
properly inserted & fully fixed onto Bottom Chassis.
Step 12 Remove 1 rivet.
Caution: Keep the Rivet in safe place, place it back during
assembling.
Step 13 Detach 22P FFC at the connector (CN2000) on Digital
P.C.B..
Step 14 Detach 18P FFC at the connector (CN2006) on Digital
P.C.B..
Step 15 Detach 17P FFC at the connector (CN2008) on Digital
P.C.B..
Step 16 Remove 7 screws.
Step 17 Remove 2 screws (All except SA-BTT775EE).
Step 17 Remove 2 screws (All except SA-BTT775EE).
Step 18 Release the tabs at both side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 19 Remove 4 screws.
Step 20 Remove the Digital P.C.B. Shield.
Caution: Replace Digital Shield gasket if torn.
Step 20 Remove the Digital P.C.B. Shield.
Caution: Replace Digital Shield gasket if torn.
104
Caution: Keep the Digital Shield in safe place. During
assembling, ensure that Digital P.C.B. Shield is properly
inserted & fully seated onto Digital P.C.B..
assembling, ensure that Digital P.C.B. Shield is properly
inserted & fully seated onto Digital P.C.B..
Step 22 Remove 1 screw.
Step 23 Remove Digital P.C.B..
Step 23 Remove Digital P.C.B..
Caution: During assembling, ensure that Digital P.C.B. is
properly located & fully seated onto Bottom Chassis.
properly located & fully seated onto Bottom Chassis.
Click on the first or last page to see other SA-BTT770EG / SA-BTT770EP / SA-BTT775EB / SA-BTT775EE / SA-BTT775GN / SC-BTT775EEK service manuals if exist.