Panasonic SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK Service Manual ▷ View online
33
9 Service Mode
9.1.
Special Mode Setting
9.1.1.
Special Mode Table 1
Item
FL display
Description
Mode name
Rating password
The audiovisual level setting password is
initialized to Level 8.
initialized to Level 8.
Setting every kind of modes for servicing.
*Details are described in 9.3 Service Mode
*Details are described in 9.3 Service Mode
Service Mode
is cleaned.
Screen display: [The history has been
cleared] is displayed for five seconds.
Same display as before
execution.
execution.
When the power is on (with no
disc), press [STOP] and [POWER]
(Remote Controller) keys
simultaneously for 5 seconds.
disc), press [STOP] and [POWER]
(Remote Controller) keys
simultaneously for 5 seconds.
BD-ROM history
cleaning
cleaning
While the unit is on, press and
hold [OK], [B] and [Y] on the
remote control at the same time
for more than 5 seconds.
hold [OK], [B] and [Y] on the
remote control at the same time
for more than 5 seconds.
- "00 RET" is displayed on the
unit's display.
unit's display.
Repeatedly press [
] on the
remote control or [POWER] on
the unit until "03 VL" is
displayed on the unit's display.
the unit until "03 VL" is
displayed on the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
or [OPEN/CLOSE] on the unit.
Key operation
Turn the power off (in Standby
mode).
Press [5], [9] and [R] button
simultaneously for five seconds
until [70 RET] is displayed on
FL.
mode).
Press [5], [9] and [R] button
simultaneously for five seconds
until [70 RET] is displayed on
FL.
Press the [
] or [
] button to
select until [80 SRV] is displayed
on FL.
on FL.
Press the [OK] button on the
remote control.
remote control.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Forced disc eject function is not accepted.
While the unit is off, press and
hold [OK], [B] and [Y] on the
remote control at the same time
for more than 5 seconds.
hold [OK], [B] and [Y] on the
remote control at the same time
for more than 5 seconds.
- "00 RET" is displayed on the
unit's display.
unit's display.
Repeatedly press [
] on the
remote control or [POWER] on
the unit until "06 FTO" is
displayed on the unit's display.
the unit until "06 FTO" is
displayed on the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
or [OPEN/CLOSE] on the unit.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] over than 10
seconds.
seconds.
SERV
34
9.1.2.
Special Mode Table 2
Description
Key operation
Item
Mode name
Front Key
FL display
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Description shown below continually.
Display following the mode.
Turn the power on.
Press the [
] or [
] button to
select until [81 AIG] is displayed
on FL.
on FL.
Press the [OK] button on the
remote control.
remote control.
NOTE 1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and
re-execute this command.
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and
re-execute this command.
NOTE 2:
This mode will be invalid if there is
no disc in the tray.
This mode will be invalid if there is
no disc in the tray.
*When releasing Aging mode, press
[POWER] key over 4 seconds.
[POWER] key over 4 seconds.
Press [5], [9] and [R] button
with disc in simultaneously
for five seconds until [70 RET]
is displayed on FL.
with disc in simultaneously
for five seconds until [70 RET]
is displayed on FL.
35
9.1.3.
Special Mode Table 3
Progressive
initialization
initialization
The progressive setting is initialized to
Interlace.
Interlace.
Item
FL display
Key operation
Mode name
Description
Front Key
When the power is on, press &
hold [SKIP REV] on remote control
follow by [POWER] on main unit.
hold [SKIP REV] on remote control
follow by [POWER] on main unit.
Micro-P version
check
check
To check for main & sub firmware version
no., model no. & date of production.
no., model no. & date of production.
FL Display
(1)
T: 003
Timer version
(2)
ROM 0D
ROM
(4)
P 3010
Sub Firmware
(3)
MV 3010
Main Firmware
(5)
Drive Firmware
D 0104
“HELLO” is displayed for 10
seconds.
seconds.
While the unit is off, press and hold
[OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
[OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the
unit's display.
Repeatedly press
unit's display.
Repeatedly press
[
]
on the
remote control or [POWER] on
the unit until "08 FIN" is
displayed on the unit's display.
Press and hold [OK] on the
remote control or [OPEN/
CLOSE] on the unit for at least
3 seconds.
the unit until "08 FIN" is
displayed on the unit's display.
Press and hold [OK] on the
remote control or [OPEN/
CLOSE] on the unit for at least
3 seconds.
When the power is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds. - "00 RET" is
displayed on the unit's display.
Repeatedly press [R] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
Press and hold [G] on the
remote control or [OPEN/CLOSE]
on the unit.
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds. - "00 RET" is
displayed on the unit's display.
Repeatedly press [R] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
Press and hold [G] on the
remote control or [OPEN/CLOSE]
on the unit.
Default setting
The date of Menu, Mode and EEPROM
setting, etc. is set to the default condition in
factory.
setting, etc. is set to the default condition in
factory.
(6)
R1:41:00
For Debug Purpose Only
(7)
POW ON
For Debug Purpose Only
(8)
LADR:14:05
For Debug Purpose Only
(9)
PADR:30:00
For Debug Purpose Only
36
9.1.4.
Special Mode Table 4
Item
FL display
Key operation
Mode name
Description
Front Key
(16)
For Debug Purpose Only
P4:BE:53
(18)
For Debug Purpose Only
P6:AF:10
(17)
For Debug Purpose Only
P5:F6:OD
(13)
P1:2F:CC
For Debug Purpose Only
(12)
P0:FF:90
For Debug Purpose Only
(14)
P2:FF:20
For Debug Purpose Only
(15)
P3:ED:06
For Debug Purpose Only
(10)
DEST: X
DEST: EE (For EE)
DEST: GS (For GS)
DEST: PH (For PH)
Destination Code
DEST: GS (For GS)
DEST: PH (For PH)
Destination Code
(11)
ERR: NONE
Error
(20)
For Debug Purpose Only
P8:03:EE
(22)
For Debug Purpose Only
P10:CE:20
(19)
For Debug Purpose Only
P7:CF:30
(21)
For Debug Purpose Only
P9:EB:2D
Click on the first or last page to see other SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK service manuals if exist.