Panasonic SA-BTT270EB / SA-BTT270EE / SA-BTT270EG / SA-BTT270EP / SA-BTT270GN / SC-BTT270EEK Service Manual ▷ View online
33
7.1.2.
Special Mode Table 2
Demonstration
lock/unlock
lock/unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
*When lock the tray.
“LOCK” is displayed for 3 seconds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
setting is not effective.
*When unlock the tray.
“UNLOCK” is displayed for 3 sec-
onds.
onds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
*When press [OPEN/CLOSE] key
while the tray being locked.
while the tray being locked.
Display ”LOCK” for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
tray is being locked.
Default setting
The date of Menu, Mode and EEPROM
setting, etc. is set to the default condition in
factory.
setting, etc. is set to the default condition in
factory.
“HELLO” is displayed 10 seconds.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
[
]
on the
remote control or [POWER] on the
unit until "08 FIN" is displayed on
the unit's display.
unit until "08 FIN" is displayed on
the unit's display.
Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit for at least 3 seconds.
on the unit for at least 3 seconds.
Item
FL display
Key operation
Mode name
Description
Front Key
34
7.1.3.
Special Mode Table 3
Progressive initialization
The progressive setting is initialized to Inter-
lace.
lace.
The display before execution
leaves.
leaves.
When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
Item
FL display
Key operation
Mode name
Description
Front Key
When the power is on, press &
hold [SKIP REV] on remote control
follow by [POWER] on main unit.
hold [SKIP REV] on remote control
follow by [POWER] on main unit.
Micro-P version check
To check for main & sub firmware version
no., model no. & date of production.
no., model no. & date of production.
FL Display
(i)
(ii)
(iv)
M-XXXX
YYYSUB
B99
(v)
Main Firmware Version
Sub Firmware Version
(vi)
AA/BB/CC
Date
(iii)
BZZZ
Driver Version
Model Code
Area
35
7.2.
Self-Diagnostic Function - Error Code
Self-Diagnostic Function provides information for error to service personnel by Self-Diagnostic Display when any error has
occurred.
U**, H** and F** are stored in my memory and held.
occurred.
U**, H** and F** are stored in my memory and held.
• You can check latest error code by transmitting [0] [1] of Remote Control in Service Mode.
Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnostic display is
ON.
ON.
7.2.1.
Error Code Table 1 (For BD)
36
7.2.2.
Error Code Table 2 (For BD)
Click on the first or last page to see other SA-BTT270EB / SA-BTT270EE / SA-BTT270EG / SA-BTT270EP / SA-BTT270GN / SC-BTT270EEK service manuals if exist.