Panasonic RX-D55EG Service Manual ▷ View online
45
9.2.
Assembling Procedure
Caution : Removal of the short pin is necessary for
replacement of new traverse unit.
replacement of new traverse unit.
Step 1 : Release the guide.
Step 2 : Push the traverse slide plate (rib), ensure both grooves
are opened.
Step 2 : Push the traverse slide plate (rib), ensure both grooves
are opened.
Step 3 : Slot the traverse unit at approximately 45° into the
mecha chassis as arrow shown.
mecha chassis as arrow shown.
46
Caution : Ensure the bosses fix exactly onto the guides.
Step 4 : Release the guide.
Step 5 : Push the traverse slide plate (rib) to lock the traverse
unit in.
Step 5 : Push the traverse slide plate (rib) to lock the traverse
unit in.
47
10 Service Position
Note: For description of the disassembly procedures, see the Section 8
Note: Insert CD before checking
Note: Insert CD before checking
10.1. Checking & Repairing Deck
P.C.B.
Step 1 : Remove the Top Cabinet Assembly.
Step 2 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 3 : Check and repair the Deck P.C.B..
Step 2 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 3 : Check and repair the Deck P.C.B..
10.2. Checking & Repairing Panel
P.C.B.
Step 1 : Remove the Top Cabinet Assembly.
Step 2 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 3 : Check and repair the Panel P.C.B..
Step 2 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 3 : Check and repair the Panel P.C.B..
48
10.3. Checking & Repairing Power
P.C.B.
Step 1 : Remove the Top Cabinet Assembly.
Step 2 : Remove the Power P.C.B..
Step 3 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 4 : Connect 8P cable at the connector (CN4100) on the
Main P.C.B..
Step 5 : Check and repair the Power P.C.B. according to the
diagram shown.
Step 2 : Remove the Power P.C.B..
Step 3 : Attach original cable with extension cable REXN0084
(10P cable from JW830 on Deck P.C.B. to CN2104 on Main
P.C.B.).
Step 4 : Connect 8P cable at the connector (CN4100) on the
Main P.C.B..
Step 5 : Check and repair the Power P.C.B. according to the
diagram shown.
10.4. Checking & Repairing Main
P.C.B.
Step 1 : Remove the Top Cabinet Assembly.
Step 2 : Remove the Main P.C.B..
Step 3 : Connect 22P FFC at the connector (CN2101) on the
Main P.C.B..
Step 4 : Connect 8P cable at the connector (CN4100) on the
Main P.C.B..
Step 2 : Remove the Main P.C.B..
Step 3 : Connect 22P FFC at the connector (CN2101) on the
Main P.C.B..
Step 4 : Connect 8P cable at the connector (CN4100) on the
Main P.C.B..
Click on the first or last page to see other RX-D55EG service manuals if exist.