LG WM2355CW Service Manual ▷ View online
2
8
9. DISASSEMBLY INSTRUCTIONS
DISPLAY
PWB ASSEMBLY
PWB ASSEMBLY
TOP PLATE ASSEMBLY
CONTROL PANEL ASSEMBLY
DRAWER
CONTROL PANEL ASSEMBLY
CONTROL PANEL ASSEMBLY
✽ Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
①
① Unscrew 2 screws on the back of the top plate.
②
② Pull the top plate backward and upward as shown.
③
③ Disconnect the Display PWB Assembly connector
from Trans cable.
④
④ Pull out the drawer and unscrew 2 screws.
⑤
⑤ Taking out 1 screw.
⑥
⑥ Lift the side the Control Panel Assembly and
pull it out
⑦
⑦ Unscrew the 8 screws from the Control Panel
Assembly.
⑧
⑧ Disassemble the Display PWB Assembly.
⇩
⇩
⇩
2
9
①
① Disconnect the SENSOR SWITCH ASSEMBLY.
②
② Remove the Protect Cover.
③
③ Disconnect the connectors.
④
④ Unscrew 1 screw on the back.
⑤
⑤ Disassemble the Main PWB.
PROTECT COVER
MAIN PWB ASSEMBLY
30
①
① Disassemble the top plate assembly.
②
②
② Pull out the drawer.
③
③
③ Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
④
④ Unscrew the nut at the lower part of the dispenser.
⑤
⑤ Disassemble the 4 connectors from the valves.
⑥
⑥ Unscrew 2 screws from the back of the cabinet.
①
① Disassemble two (or three) connectors from
the NOISE FILTER.
②
② Unscrew a screw from the TOP BRACKET.
DISPENSER ASSEMBLY
NOISE FILTER
※
※ Wire Color
①
①
① Blue Housing (YL-BK)
②
②
② White Housing (WH-BK)
③
③
③ Blue Housing (GY-BK)
④
④
④ Red Housing (BL-BK)
3
1
①
① Unscrew the 5 screws from upper of the canbinet
cover.
②
② Unscrew the screw from filter cover.
③
③ Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
④
④ Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
Click on the first or last page to see other WM2355CW service manuals if exist.