LG WM2355CW Service Manual ▷ View online
3
2
⑤
⑤ Open the door.
⑥
⑥
⑥ Disassemble the clamp assembly.
⑦
⑦ Tilt the cabinet cover.
⑧
⑧
⑧ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑨
⑨ Lift and separate the cabinet cover.
⑩
⑩ Disassemble the clamp assembly.
⑪
⑪
⑪ Disassemble the Gasket.
3
3
①
① Open the door.
②
②
② Unscrew the 7 screws from the HINGE COVER.
③
③ Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
④
④ Unscrew a screw from the lower side of door.
⑤
⑤
⑤ Disassemble the door upward.
DOOR
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
34
PUMP
HEATER
THERMISTOR
①
①
Disassemble the cabinet cover.
②
②
Separate the pump hose, and the bellows.
③
③
Disassemble the pump assembly in arrow
direction.
①
①
Disassemble the cabinet cover.
②
②
Separate 2 connectors from the heater.
③
③
Loosen the nut and pull out the heater.
①
①
Disassemble the cabinet cover.
②
②
Unplug the white connector from the thermistor.
③
③
Pull it out by holding the bracket of the
thermistor.
※
※ CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
* WM2455H*
only
only
3
3
5
MOTOR/DAMPER
①
①
Disassemble the back cover.
②
②
Remove the bolt.
③
③
Pull out the Rotor.
①
①
Unscrew the 2 screws from the tub bracket.
②
②
Remove the 6 bolts on the stator.
③
③
Unplug the 2 connectors from the stator.
①
①
Disassemble the damper hinges from the tub
and base.
②
②
Separate the dampers.
※
※ NOTE
• Once removed, replace the damper with
new one.
Click on the first or last page to see other WM2355CW service manuals if exist.