DOWNLOAD LG WM2355CW Service Manual ↓ Size: 6.63 MB | Pages: 39 in PDF or view online for FREE

 EST. TIME REMAINING

• This display shows:
  a) the estimated time remaining
      in the cycle when operation.
  b) an error code when an error
      has been detected.

CYCLE SELECTOR

• Rotate the cycle selector knob 
  to select the cycle designed for 
  different types of fabric and 
  soil level.

START/PAUSE button

• Use this button to 
  start/stop the 
  washer.

Wash, Rinse temp., Spin speed, Soil Level  

• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly 
   to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until 
   the desired setting is on.

OPTION button

• Prewash: Use this option for loads that need 
  pretreatment. It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and then spin.
• EXTRA RINSE: Select this option to rinse and 
  spin a load separately from a regular cycle.
• Stain Cycle: Add time to the wash and rinse 
  for better stain removal. Automatically provide a rinse.
• WATER PLUS:Select this option to add extra 
  water to the wash and rinse cycles for superior 
  results, especially with large or bulky items.

POWER button

• Use this button to turn 
   power On/Off.

Delay Wash, CUSTOM PROGRAM

• Delay Wash allows the start of any cycle to be delayed for 1~19 hours.
• CUSTOM PROGRAM allows you to store a customized wash cycle
  for future use.

DOOR LOCKED lamp

• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause   
   button to stop the washer.

5. OPERATION

6. WIRING DIAGRAM/PROGRAM CHART

7. TROUBLESHOOTING

7-1. BEFORE PERFORMING SERVICE

■ Be careful of electric shock when disconnecting parts while troubleshooting.
■ The voltage of each terminal is 120 V AC and DC when the unit is plugged in.

7-2. QC TEST MODE.

The washer must be empty and the controls must be in the off state.

1. Press the WASH/RINSE and SPIN SPEED buttons simultaneously.

2. Press the Power       button, while the above condition. Then buzzer will sound twice.

3. Press the Start/Pause      button repeatedly to cycle through the test modes.

7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

None

1 time

2 times

3 times

4 times

5 times

6 times

7 times

8 times

9 times

10 times

11 times

Turns on all lamps and  locks the door.

Tumble clockwise.

Low speed Spin.

High speed Spin.

Inlet valve for prewash turns on.

Inlet valve for main wash turns on.

Inlet valve for hot water turns on.

Inlet valve for bleach turns on.

Tumble counterclockwise.

Water Temperature (Thermistor)

Drain pump turns on.

Off

rpm (42~50)

rpm (55~65)

rpm (105~115)

Water level frequency (225~265)

Water level frequency (225~265)

Water level frequency (225~265)

Water level frequency(225~265)

rpm (42~50)

Water Temperature [°C]

Water level frequency (225~265) 

❋ Press the CUSTOM PROGRAM and PRE-WASH buttons simultaneously.

A display indicating 41 means a water level frequency of 24.1 kHz. 

The digits indicate the water level frequency.

➔

➔