LG WM2150HS Service Manual ▷ View online
4. INSTALLATION & TEST
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
1
2
3
4
5
6
6
REMOVE THE SHIPPING
BOLTS
• Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove easily.
•
Turn the leveling feet to adjust
the appliance.
the appliance.
•
Turn clockwise to raise;
counterclockwise to lower.
counterclockwise to lower.
• Keep the shipping bolts and
spanner for future use.
• Insert the 4 caps (provided)
into the hole.
ADJUST THE
LEVELING
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
8
9
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
10
TEST OPERATION
1
Preparation for
washing.
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the Start/Pause
button.
button.
•
Listen for a click to determine if
the door has locked.
the door has locked.
6
Check the water heating
function.
function.
•
Press the WASH/RINSE button
and the present temperature will
be displayed.
and the present temperature will
be displayed.
5
Check the automatic
reverse rotation.
reverse rotation.
4
Check the water supply.
•
Check if water is supplied
through the detergent dispenser.
through the detergent dispenser.
7
Check the drain and spin
functions.
functions.
•
Power off and the power on.
•
Press the SPIN SPEED button.
•
Press the START/PAUSE button.
•
Check the spin and drain
functions.
8
Press the
START/PAUSE button.
START/PAUSE button.
9
Water removal.
•
If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
2
Press the POWER button.
•
Listen for a click to determine
if the door is unlocking.
7
•
Check if the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
11
5. OPERATION
5-1. CONTROL PANEL FEATURES
WM2150H* / WM2050H*
Click on the first or last page to see other WM2150HS service manuals if exist.