LG WM2150HS Service Manual ▷ View online
UNBALANCE ERROR
OVER FLOW ERROR
[Note] Environmental check list
1) Removal of transportation-based fixed bolt.
2) Confirmation on the material to see if it is capable
1) Removal of transportation-based fixed bolt.
2) Confirmation on the material to see if it is capable
of handling two different types of blanket materials.
Is displayed?
Yes
Does the laundry lean
toward one side, not evenly
put in the DRUM assembly?
toward one side, not evenly
put in the DRUM assembly?
Put laundry
evenly
In the DRUM
assembly
evenly
In the DRUM
assembly
Yes
Is the washing machine
installed at an angle?
installed at an angle?
Adjust the
height of
washing
machine
to be kept
horizontally
height of
washing
machine
to be kept
horizontally
Yes
No
Is displayed?
Yes
When you press both
CUSTOM button and
PRE-WASH button
simultaneously, is the
water level frequency over
21.3kHz?
CUSTOM button and
PRE-WASH button
simultaneously, is the
water level frequency over
21.3kHz?
(Refer to 7-3)
Check the AIR
CHAMBER
and the tube
(clogged).
CHAMBER
and the tube
(clogged).
No
Does the inlet valve work
when the power is not
applied?
when the power is not
applied?
Replace the
INLET VALVE ASSEMBLY
INLET VALVE ASSEMBLY
If the inlet
valve work
continuously
when the power
is applied,
Replace the
MAIN PWB
ASSEMBLY
valve work
continuously
when the power
is applied,
Replace the
MAIN PWB
ASSEMBLY
No
Yes
Yes
28
29
PRESSURE SENSOR ERROR
Is displayed?
Yes
Is the connector connected
to pressure sensor
disconnected or
disassembled?
to pressure sensor
disconnected or
disassembled?
Reconnect or
repair
the connector
repair
the connector
No
No
Yes
Is the resistance of the
pressure sensor out of
range?
(pin 1~ pin 3)
(21~23
pressure sensor out of
range?
(pin 1~ pin 3)
(21~23
Ω ±10%)
Replace the
pressure
switch
pressure
switch
No
Yes
Is the AIR CHAMBER and
the tube clogged?
the tube clogged?
Replace the MAIN PWB
assembly.
assembly.
Fix the air
chamber
and remove
the foreign
material.
chamber
and remove
the foreign
material.
Yes
30
8-5. TROUBLESHOOTING ELSE
NO POWER
1. Be careful of electric shock if disconnecting parts while troubleshooting.
2. First of all, check the connection of each electrical terminal with the wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, reinsert the connectors correctly.
2. First of all, check the connection of each electrical terminal with the wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, reinsert the connectors correctly.
CAUTION
Check the
fuse or reset
the circuit
breaker
fuse or reset
the circuit
breaker
Yes
No
Is the current rating of
multi-outlet power strip
enough?
(Avoid connecting several
electric devices.)
multi-outlet power strip
enough?
(Avoid connecting several
electric devices.)
Is the supplied voltage
120V AC?(+10%, -15%)
120V AC?(+10%, -15%)
Alternate with
explanation
explanation
Yes
Yes
No
Is the connector connected
to PCB/Noise filter
disconnected or
disassembled?
to PCB/Noise filter
disconnected or
disassembled?
Reconnect
or repair
the connector
or repair
the connector
No
Replace the
MAIN PWB
ASSEMBLY
MAIN PWB
ASSEMBLY
Yes
No
Is LED on while the power
is on?
is on?
Replace the
DISPLAY
PWB
ASSEMBLY
DISPLAY
PWB
ASSEMBLY
Connecting connector
MAIN PWB~ Display PWB
No
Is three pin wire of
display PWB broken?
display PWB broken?
Main LED
31
BUTTON DOESN’T WORK
Is the connector connected
to Main PWB / Display
PWB disconnected or
disassembled?
to Main PWB / Display
PWB disconnected or
disassembled?
Reconnect or
Repair
the connector
Repair
the connector
Yes
Is the display PCB broken?
(check the buzzer sound
and LED light while push
the button.)
(check the buzzer sound
and LED light while push
the button.)
Replace the
DISPLAY
PWB
ASSEMBLY
DISPLAY
PWB
ASSEMBLY
Yes
Is the button of panel stuck?
Repair the
button
button
Yes
No
No
Click on the first or last page to see other WM2150HS service manuals if exist.