DOWNLOAD LG WF-L750TC / WF-L801TC / WF-L880NTC Service Manual ↓ Size: 9.48 MB | Pages: 49 in PDF or view online for FREE

2) Option Washing

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually

Press the AUTO OFF (Power) button to turn power on.

Press the PROCESS button until above Option Washing light is on.   

When you want to only drain, wait until the water in the washing tub drains

completely and then, turn off the power.  

Add  the laundry into the washing tub.

Press the  START/PAUSE

button.

Press the  WATER LEVEL

button, to control the water level according to the amount of

laundry. If you do not choose anything, it is set the LARGE water level automatically.

Add the detergent and close the lid.

1

2

3

4

5

6

• When a Wash, Wash/Rinse

or Rinse only option is selected, after the wash is completed the water will not be drained

off, If you wish to drain the water, press the  SPIN button and wait until the water in the tub has drained  completely. Then

press the   START/PAUSE 

button .

, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options

AUTO OFF

• After all washing conditions are set according to the manual.

Press the   POWER  button.

Press the  START/PAUSE

button to start washing.

During the wash program, all the buttons are locked until

washing is completed or it is child- lock

function is deactivated manually. 

Press both the PROCESS

button and the  PROGRAM button simultaneously.

Turn Power on.

AUTO OFF

If you want to use the washing machine  without alarm signal sounds, press both the  

LEVEL  and   PROCESS

buttons simultaneously. 

To make buzzer work, press both the  

and   PROCESS

buttons simultaneously

one more time.

If you want to lock all the keys to prevent all the setting from being changed by a child, you

can use the child lock option.

If you want to unlock during wash, press both the  PROCESS

and the  PROGRAM button

simultaneously again.

How to Lock

How to Unlock

In child-Lock mode, all process light will blink.

2

1

3

3) Child Lock function

Leave  the  lid  open  after  washing  to  allow  moisture  to  evaporate.  If  you  want  to

clean  the  inner-tub  use  a  clean  soft  cloth  dampened  with  liquid  detergent,  then

rinse. (Do not use harsh or gritty cleaners.) 

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with

sharp objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if weather

will be below freezing.

When there is a fear of freezing

If frozen

• Remove the water supply hose, and immerse it in hot water at approx.. 40

 C.

• Pour approx.. 2 liters of hot water at approx.. 40

 C, into the bowl and let it stand for 10 minutes.

• Connect the water supply hose to the water tap and confirm that the washing machine performs

the supply and drainage of water.

• Close the water taps and remove the Water Supply Hose. 

• Remove the water which remains in the water supply.

• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

Cleaning the Inside of your Washer

If you use fabric softener or do regular cold water washing, it is very important that you occasionally

clean the inside of your washer.

• Fill your washer with hot water.
• Add about two cups of a powdered detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.

We do not recommend that you wash clothes during this procedure.

3-6. CARE AND MAINTENANCE

4. SERVICE INFORMATION

4-1. SCHEMETIC DIAGRAM