LG WD1316AD7 Service Manual ▷ View online
53
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
HEATER
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
THERMISTOR
Disassemble the cabinet cover.
Unplug the white connector from the
thermistor.
Pull it out by holding the bracket of the
thermistor.
Unplug the white connector from the
thermistor.
Pull it out by holding the bracket of the
thermistor.
CAUTION
• When assembling the heater, insert the
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
1
2
3
2
3
1
2
2
3
54
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
LAMP ASSEMBLY
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as
shown.
Pull the top plate backward and upward as
shown.
TOP PLATE ASSEMBLY
1
2
3
2
3
1
Disconnect the connector.
3
Disassemble the lamp assembly.
4
2
55
MOTOR/DAMPER
NOTE
• If you pull the dampers apart, the must be
• If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
can be re-used.
Bolt
Rotor
DAMPER
HINGE,
DAMPER
DAMPER
Disassemble the back cover.
Remove the bolt.
Pull out the rotor.
Remove the bolt.
Pull out the rotor.
1
2
3
2
3
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
1
2
3
2
3
Disassemble the damper hinges from the tub
and base.
and base.
1
56
11-1. CABINET & CONTROL PANEL ASSEMBLY
11. EXPLODED VIEW
A105
A133
A310
A300
A303
A485
A455
A410
A151
A130
A140
A131
A153 A390
A201
A155
A440
A430
A100
A101
A104
A102
F215
F210
A450
A111
A110
A141
A150
A103
A220
A200
M410
A106
F110
A154
A152
A156
A175
A180
A181
Click on the first or last page to see other WD1316AD7 service manuals if exist.