LG WD1316AD7 Service Manual ▷ View online
49
Open the door.
Unscrew the 7 screws from the HINGE COVER.
Unscrew the 7 screws from the HINGE COVER.
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
Unscrew a screw from the lower side of door.
Disassemble the door upward.
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
Be careful! The door is heavy.
NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
50
CABINET COVER
Unscrew the 5 screws from upper of the
cabinet cover.
cabinet cover.
Unscrew the screw from the filter cover.
Put a flat ( - ) screwdriver or putty knife into the
hinge slots at the bottom of the cover and pry
it out.
hinge slots at the bottom of the cover and pry
it out.
Unscrew the screw from the lower side of the
cabinet cover.
cabinet cover.
1
2
3
4
51
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the gasket.
Lift and separate the cabinet cover.
NOTE : When assembling the
cabinet cover, connect the door switch
connector.
cabinet cover, connect the door switch
connector.
5
6
7
8
9
10
11
52
DOOR
Open the door.
Unscrew the 4 screws from the hinge.
(Use the 8mm tool.)
(Use the 8mm tool.)
DOOR LOCK SWITCH ASSEMBLY
Open the door and remove the gasket using
the special gasket pliers.
the special gasket pliers.
Unscrew the 2 screws.
Disassemble the door upward.
NOTE
• Reconnect the connector after replacing
• Reconnect the connector after replacing
the door switch assembly.
1
3
1
2
2
Click on the first or last page to see other WD1316AD7 service manuals if exist.