LG WD1316AD7 Service Manual ▷ View online
21
CAUSE
SYMPTOM
ERROR
LOCKED MOTOR
ERROR
ERROR
EEPROM ERROR
• The connector (3-pin, male, white) in the MOTOR
HARNESS is not connected to the connector (3-pin,
female, white) of STATOR ASSEMBLY.
female, white) of STATOR ASSEMBLY.
• The electric contact between the connectors (3-pin,
male, white) in the MOTOR HARNESS and 4-pin,
female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut
(open circuited).
(open circuited).
• The hall sensor is out of order/defective.
8
• EEPROM is out of order.
• Supplied voltage is not correct.
• Supplied voltage and rated voltage are not matched.
Displayed only when the START/PAUSE button is
first pressed in the Load Test Mode.
first pressed in the Load Test Mode.
9
After the power supply is stopped while washing
POWER SUPPLY
ERROR
machine is working, the power is supplied rapidly.
11
POWER FAILURE
10
22
8-4. TROUBLESHOOTING WITH ERROR
INLET VALVE ERROR
23
DRAIN ERROR
WASH/RINSE
DELAY WASH
SPIN SPEED
SOIL LEVEL,
24
HEATING ERROR
Click on the first or last page to see other WD1316AD7 service manuals if exist.