DOWNLOAD LG WD1316AD7 Service Manual ↓ Size: 13.58 MB | Pages: 60 in PDF or view online for FREE

Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
Install the inlet hose to correct temperature
water tap.
Otherwise, it cause drips on the drawer panel
handle and drawer panel.

HOW TO CONNECT THE INLET HOSE 

CONNECT THE DRAIN HOSE

• Make sure that the hose is not twisted.

CONNECT POWER PLUG

The end of the drain hose should be placed less than 96” from the floor.

• Avoid submerging the end of the hose.

• Connect the power plug to the wall outlet.

• Avoid connecting several electric devices, 

as doing so may cause a fire.

Hot

Cold

7 TEST OPERATION

Preparation for

washing.

• Connect the power plug to the

outlet.

• Connect the inlet hoses. 

Press the POWER button.

Press the START/PAUSE

button.

• Listen for a click to determine if the

door has locked.

Check the water heating

function.

• Press the WASH/RINSE button

and  the present temperature will

be displayed.

• Check if the drum rotates

clockwise and counterclockwise. 

Check the automatic reverse

rotation.

Check the water supply.

• Check if water is supplied through

the detergent dispenser.

Check the drain and spin

functions.

• Power off and the power on.

• Press the SPIN SPEED button.

• Press the START/PAUSE button.

• Check the spin and drain functions.

• Listen for a click to determine if the

door is unlocking.

Press the START/PAUSE

button.

Water removal

• If SERVICE is needed during

check, remove the remaining

water by pulling out the hose cap.

WD1316ADA7