LG WD1316AD7 Service Manual ▷ View online
17
No.
Explanation
Process
10 Intermittent
spin
• To reach the correct set speed, the motor rotates clockwise and
counterclockwise directions after spin process starts.
• If the water level frequency is lower than 23.0 kHz,
a washer senses suds and starts suds removal process.
11 Rinse
spin
• In this process, the remaining water during washing process is
extracted and the selected speed is kept.
• Removing suds process is in active mode at this cycle.
12 Remaining
spin
• After spin finishes, the drum rotates by remaining spin power until it
stops. Motor power is off.
• This process is overlapped with next process.
13 Rinse water
supply
• Water supply for rinse process.
14 Rinse
• Rinsing process.
15
Last
drainage
• After spin finishes and power is not supplied to motor, the drum
rotates by remaining spin power.
• If rinse hold is selected, the drainage is not proceeded after rinse
finishes.
16 Disentangling
• The same as item 9.
17 Intermittent spin • The same as item A.
18
18
19
20
21
22
Main spin1
• The same as item B.
Main spin2
• At the end of a main spin, the spin speed will reach the selected rpm.
Remaining spin • The same with item C.
Disentangling
• After spin finishes, disentangling starts to remove unbalanced
laundry.
End
• After ‘end’ signal is displayed, it stays for 8 seconds and power is
automatically turned off. (Auto type door switch)
• After door switch is off, end signal is displayed in the case of
manual type and it takes around 2 minute to turn off door switch.
18
6. Wiring Diagram / Program Chart
19
7. TEST MODE
SPIN SPEED
SOIL LEVEL
WASH/RINSE
DELAY WASH
Dry heater on.
off
off
-
-
20
8. TROUBLESHOOTING
Click on the first or last page to see other WD1316AD7 service manuals if exist.