LG F1443KDS / F1443KDS7 / F1443KDS9 Service Manual ▷ View online
57
Front Gasket
Disassembly top plate assembly.
Needed tools : (
) Clamp Jig, (+) Electric driver
Disassembly control panel assembly.
Disassembly lower cover.
Disassembly cabinet cover.
Diassembly front gasket clamp by using
clamp jig.
clamp jig.
6
Take out gasket hole parts from the hook
of tub cover (Direction of 11:00, 9:00,
7:00, 6:00, 5:00, 3:00 and 1:00 o’clock )
of tub cover (Direction of 11:00, 9:00,
7:00, 6:00, 5:00, 3:00 and 1:00 o’clock )
( Pay attention to gasket rib where there
are in direction of 11:00, 9:00, 3:00 and
1:00 o’clock )
1:00 o’clock )
7
Take out front gasket upper rib in dry duct
hole of tub cover.
hole of tub cover.
8
Disassembly front gasket.
1
2
3
4
5
58
Friction Damper (Right side)
The right side cabinet is disassembled.
Needed tools : Damper pin Jig, long nose, (+) Electric driver
Remove 2 damper pins from the damper
bracket and base holder.
bracket and base holder.
Disassembly friction damper.
Suspension (Right side)
The right side cabinet is disassembled.
Needed tools :12,13 mm wrench, (+) Electric driver
Disassembly a nut, (Suspension – Base
Cabinet)
Cabinet)
Remove a bolt of suspension.
Disassembly suspension.
1
2
3
1
2
3
4
59
Damper Bracket (Right side)
Disassembly top plate assembly.
Remove 8 screws , right side of back cover.
Disassembly control panel assembly.
Disassembly lower cover.
Disassembly cabinet cover.
Remove an earth screw on the right side cabinet.
Disassembly right side cabinet.
Remove a bolt of right suspension.
Remove a damper pin connected with damper
bracket(Right).
Remove 4 screws on the damper bracket.
Disassembly damper bracket.
Needed tool : 12,13mm wrench, (+) Electric driver
1
2
3
4
5
6
7
8
9
10
11
60
Vibration Sensor
Needed tools :Nipper, Cable Tie, (+) Electric driver
The back cover is disassembled.
Remove a cable tie.
Disassembly vibration senser assembly.
1
2
3
Click on the first or last page to see other F1443KDS / F1443KDS7 / F1443KDS9 service manuals if exist.