LG F1443KDS / F1443KDS7 / F1443KDS9 Service Manual ▷ View online
53
1 Lower cover is disassembled.
2 Take out PWB assembly in front of washer.
3 Remove 3 clamps from the each hose.
4 Remove 4 screws from the base cabinet.
5 Disconnect the wire of pump.
6 Take out drain pump assembly in direction
of red arrow.
1 Loosen the nut.
2 Remove washing heater by pulling out.
2 Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
the heater to heater clip on the bottom of tub
and check the position of wire color.
PUMP
HEATER
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
54
1 Remove washing heater.
2 Remove the foreign object(wire,coin,etc) by
2 Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
1 Disassembly lower cover assembly.
2 Disassembly MAIN PWB ASSEMBLY
3 Disconnect the wiring connector.
Fist, Press hook and turn the safety switch
assembly switch assembly safety.
assembly switch assembly safety.
4 Unscrew one screw from the base.
SWITCH ASSEMBLY, SAFETY
2
1
55
Cablinet Back Disassembly
2 Remove 6 screws between back cover
and side cabinet.
1
3 Remove 4 screws conneted back cover
with base cabinet.
4 Remove 2 screws, between back cover
and tub outer.
5 Remove 2 screws for fixing drain hose
holder.
6 Remove 4 screws from Inlet valve and
AG.
7 Remove 2 earth screws from back cover.
8 Disassembly 3 holder hooks for fixing
harness.
9 Disassembly a red connector assembled
noise filter.
10 Pull out drain hose from the back cover.
11 Disassembly back cover.
Disassembly top plate assembly.
Needed tool : (+) Electric driver
56
Rear Gasket
Disassembly top plate assembly.
Needed tools :12,13 mm wrench, (
) Clamp Jig, Cable Tie, (+) Electric driver
Disassembly back cover.
Remove rear gasket clamp large and
small by using gasket clamp jig.
small by using gasket clamp jig.
Unscrew a rear suspension nut.
Unscrew a bolt , between bearing housing
and rear suspension.
and rear suspension.
Disassembly rear suspension.
Remove 8 screws, on the both weight
bracket.
Disassembly rear gasket.
1
2
3
4
5
6
7
8
Click on the first or last page to see other F1443KDS / F1443KDS7 / F1443KDS9 service manuals if exist.