DOWNLOAD LG F1443KDS / F1443KDS7 / F1443KDS9 Service Manual ↓ Size: 14.07 MB | Pages: 64 in PDF or view online for FREE

Does the load lean toward one

side, or is the load a few items?

Is the washing machine installed

at an angle?

Adjust the height of washing

machine to be kept horizontally. 

( Page 7)

Is the laundry mixed?

The few items of clothing will clump together 

and their weight will be in one place on the drum,

throwing the weight off during spin mode.

Try rearranging the laundry in drum 

Or the laundry is separated by size, type, and color.

Separate by size, 

type and color

Is the drain hose kinked ?

Check drain hose for kink and straighten the 

.

Drain Hose

Is the 

clogged ?

Check & Clean 

.

This kind of accumulation on the drain filter not only
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.

Open the Cover by coin or

finger(only new model)

Drain water by removing the

hose cap.

Disassemble the pump

filter by turning the filter

cap counterclockwise.

Filter clogged by foreign objects

Assemble & close cap

Clean the filter

Is the 

connected correctly to

the 

and the 

?

Or is the 

alright ?

Is the 

greater

than 1.0 m above the floor?

When there is not water in the

pump casing, is the water level

frequency over 26.2KHz ?

Observe 

requirements 

of 

m maximum.

- Your washer will not be able to drain out 

water adequately, if the standpipe exceeds 1.0 m.

In this case, water may flow back into the washer.

Check the 

and the 

(clogged).

And When you check the water level frequency

again, if it is over 25.5KHz, you replace the

.

Reconnect or repair the 

.

Or replace the 

.

Replace the 

.

Replace the 

.

Is the resistance of the Pump Motor out

of 152 ~ 175Ω?
Or is the Impeller operating normally?

Is Pump motor started, when the spin mode is

started ? 

OR

Is the water coming in

drawer continuously? 

Replace the 

.

After power off for 10 sec. and power on.

Does the water level over reference line and Is 

the water level frequency 26.2Khz ?

Or does 

the water level over reference line and is the water level frequency 26.2Khz ? 

* Water level frequency

- Press and Hold '

Prewash

' & '

Temp

' 

simultaneously.

Data view type: ‘040’

Replace the 

assembly.

If FE is displayed again, 

then replace the 

.

If FE is displayed again, 

then replace the 

.

Check the 

and the 

(clogged).