DOWNLOAD LG F1299RDS27 Service Manual ↓ Size: 6.3 MB | Pages: 42 in PDF or view online for FREE

(1)

(1)

(2)

Normal

Soak

600

Check during spin if the frequency of the water
level is 248 or more.

When pressing Rinse, Temp, and Power buttons
at the same time after power, press the
START/PAUSE button 2 times in QC Test mode,
is the drum spinning at low speed?

Is it disconnected, or disassembled?
[Red: 3pin (1), NA: 4pin (2)]

Resistance of terminal:

About 5Ω -15Ω

Check the motor connector, Is the resistance of
the terminal the same as the figure?
MOTOR TERMINAL

Replace the MAIN PWB ASSEMBLY

Does the spring of Latch Hook actuate?

Is there clicking sound once or twice when the
START/PAUSE button is pressed to start the cycle?

Is DOOR SWITCH ASSEMBLY broken?

Check the SENSOR SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the SENSOR
SWITCH ASSEMBLY or the
HOSE, replace the SENSOR
SWITCH ASSEMBLY or the
HOSE.

Normal

Correct the connection.

Replace the STATOR
ASSEMBLY

Replace Door Assembly.

Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Red 3 pin, Yellow 4 pin and
white 3 pin connector (1)).

Replace the DOOR
SWITCH ASSEMBLY.

,

9.DISASSEMBLY INSTRUCTIONS

Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.

 

              

          

      

    

          

  ! "   
# $         

  

%   &       

&      

'( $)'* )++*,$-

.(/'!($ )/*$ )++*,$-

!)*!

.(/'!($ )/*$ )++*,$-

0+$)-  )++*,$-

Disconnect the connectors.

Disconnect the POWER connector and SENSOR

SWITCH ASSEMBLY.

Remove the Protect Cover.

Unscrew 1 screw on the back.

Disassemble the Main PWB.

DRAWER

Disassemble the 2 or 3 connentors from the valves.

Unscrew the nut at the lower part of the dispenser.

Unscrew 2 or 4 screws from the back of the cabinet.

Wire Color

Blue Housing (GY-BK)

White Housing (WT-BK)

Red Housing (VT-BK)

Blue Housing (YL-BK)

Disassemble two (or three) connectors from the

noise filter.

Unscrew a screw from the top bracket.

Disassemble the top plate assembly.

Pull out the drawer.

Push out the DISPENSER ASSEMBLY after

unscrew 2 screws.