LG F1299RDS27 Service Manual ▷ View online
17
If you press the START/PAUSE button when an error is displayed, any error except
will
disappear and the machine will go into the pause status.
In case of
In case of
if the error is not resolved within 20 sec., or the in case of other
errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of
if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of
, power will not be turned off.
7-4.ERROR DISPLAY.
ERROR
SYMPTOM
CAUSE
WATER INLET
ERROR
• Correct water level (246) is not reached within 8 minutes
after water is supplied or it does not reach the preset water
level within 25 minutes.
level within 25 minutes.
1
DOOR OPEN
ERROR
• Door not all the way closed.
• Loose electrical connections at Door switch and
• Loose electrical connections at Door switch and
PWB Assembly.
• The DOOR SWITCH ASSEMBLY is out of order.
2
IMBALANCE
ERROR
• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
3
DRAIN
ERROR
• Water is over flowing(over 8 level).
If is displayed, drain pump operates to
drain water automatically.
4
OVER FLOW
ERROR
• The sensor pressure switch is out of order.
5
PRESSURE
SENSOR
ERROR
• The SENSOR SWITCH ASSEMBLY is out of order.
6
HEATING
ERROR
• The THERMISTOR is out order.
7
,
18
ERROR
SYMPTOM
CAUSE
• The connector (3-pin, male, white) in the MOTOR
HARNESS is not connected to the connector
(3-pin, female, white) of STATOR ASSEMBLY.
(3-pin, female, white) of STATOR ASSEMBLY.
• The electric contact between the connectors
(3-pin, male, white) in the MOTOR HARNESS
and 4-pin, female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
and 4-pin, female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuited).
circuited).
• The hall sensor is out of order/defective.
8
LOCKED
MOTOR
ERROR
19
8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND SOLUTION FOR ABNORMAL OPERATION
NO POWER
Water inlet trouble
GUIDE FOR SERVICE CALL
Is displayed?
Is the power plug connected firmly to
220-240V AC outlet?
Power failure? or Breaker opened?
Is the outlet controlled by a switch?
Visit to service.
Is the tap opened?
Is the tap frozen?
Is the water supply shut-off?
Is filter in the inlet valve clogged with
foreign material?
Visit to service.
Clean the filter of
inlet valve
SYMPTOM
20
Door error
• Drain trouble
GUIDE FOR SERVICE CALL
Is displayed?
Visit to service.
Clean
up the
filter.
up the
filter.
Close the door.
SYMPTOM
Started with door opened?
Was the load too large?
Avoid overloading.
Clicking sound is heard once or twice,
when the START/PAUSE button is
pressed to start the cycle?
Visit to service.
Check if the door switch is OK.
Is the drain pump filter clogged with foreign
material such as pins, coins, etc?
Is the drain hose frozen
kinked, or crushed?
Click on the first or last page to see other F1299RDS27 service manuals if exist.